Restricted access
Research articles
Research articlesStudy of diffusionless and diffusional transformations using in situ cooling and heating techniques in a scanning electron microscope
Published:26 October 2020https://doi.org/10.1098/rsta.2020.0284
Abstract
In situ electron microscopy can be an effective tool to investigate the underlying science of many transformation mechanisms in materials science. Useful utilization of these experimentations will provide greater insight into many of the existing theories, as microstructural changes can be visualized in real time under some applied constraints. In this study, we have investigated two basic phase transformation phenomena: diffusionless and diffusional mechanisms with the help of in situ cooling and heating techniques in scanning electron microscope (SEM). In situ cooling experiments have been carried out on secondary hardening ultra-high-strength steels to understand the diffusionless transformation of austenite to martensite. Nucleation and growth of the martensites have been observed with cooling in different steps to −194°C. Details of the formation of different variants of martensites in steel were studied with the help of orientation imaging microscopy. Diffusional transformations were studied in terms of oxidation of pure copper in SEM using in situ heating technique. Different heating cycles were adopted for different samples by in situ heating to a maximum temperature of 950°C for the oxidation study. Nucleation of copper oxides and subsequent growth of the copper oxides at different temperatures were studied systematically. Raman spectroscopy and orientation imaging were done to confirm the formation of oxides and their orientations. The thermal cycling phenomenon was replicated inside SEM with heating and cooling and it has been demonstrated how the nature of copper and its oxides changes with the thermal cycle.
This article is part of a discussion meeting issue ‘Dynamic in situ microscopy relating structure and function’.
Footnotes
References
- 1.
Callister WD, Rethwisch DG . 2020Materials science and engineering: an introduction, 10th edn. Hoboken, NJ: Wiley. Google Scholar - 2.
Podor R, Ravaux J, Brau H-P . 2012In situ experiments in the scanning electron microscope chamber. In Scanning electron microscopy (ed.Kazmiruk Viacheslav ), pp. 33–54. InTech. See http://www.intechopen.com/books/scanning-electron-microscopy/in-situexperiments-in-the-scanning-electron-microscope-chamber. Google Scholar - 3.
Taylor S, Masters I, Li Z, Kotadia HR . 2020Direct observation via in situ heated stage EBSD analysis of recrystallization of phosphorous deoxidised copper in unstrained and strained conditions. Met. Mater. Int. 26, 1030–1035. (doi:10.1007/s12540-019-00493-y) Crossref, ISI, Google Scholar - 4.
Takajo S, Merriman CC, Vogel SC, Field DP . 2019In-situ EBSD study on the cube texture evolution in 3 wt% Si steel complemented by ex-situ EBSD experiment—from nucleation to grain growth. Acta Mater. 166, 100–112. (doi:10.1016/j.actamat.2018.11.054) Crossref, ISI, Google Scholar - 5.
Ubhi HS, Parsons J, Othen N, Campbell S, Poole R, Gholini A . 2013In-situ EBSD phase transformation and recrystallisation. J. Phys. Conf. Ser. 522, 012011. (doi:10.1088/1742-6596/522/1/012011). Electron Microscopy and Analysis Group Conference 2013 (EMAG2013), York, UK. Crossref, Google Scholar - 6.
Nakamichi H, Humphreys FJ, Brough I . 2008Recrystallization phenomena in an IF steel observed by in situ EBSD experiments. J. Micros. 230, 464–471. (doi:10.1111/j.1365-2818.2008.02006.x) Crossref, PubMed, ISI, Google Scholar - 7.
Piazolo S, Seward GGE, Seaton N, Prior DJ . 2004The potential of combined in-situ heating experiments and detailed EBSD analysis in the investigation of grain scale processes such as recrystallization and phase transformation. Mater. Sci. Forum 467–470, 1407–1412. (doi:10.4028/www.scientific.net/MSF.467-470.1407) Crossref, Google Scholar - 8.
Huang Y, Humphreys FJ, Brough I . 2002The application of a hot deformation SEM stage, backscattered electron imaging and EBSD to the study of thermomechanical processing. J. Micros. 208, 18–23. (doi:10.1046/j.1365-2818.2002.01061.x) Crossref, PubMed, ISI, Google Scholar - 9.
Bozzolo N, Jacomet S, Logé RE . 2012Fast in-situ annealing stage coupled with EBSD: a suitable tool to observe quick recrystallization mechanisms. Mater. Charact. 70, 28–32. (doi:10.1016/j.matchar.2012.04.020) Crossref, ISI, Google Scholar - 10.
Ubhi HS, Brough I, Larsen K . 2013Study of recovery and recrystallisation in a folded Al alloy. Mater. Sci. Forum 753, 7–10. (doi:10.4028/www.scientific.net/MSF.753.7) Crossref, Google Scholar - 11.
Podor R, Nkou Bouala GI, Ravaux J, Lautru J, Clavier N . 2019Working with the ESEM at high temperature. Mater. Charact. 151, 15–26. (doi:10.1016/j.matchar.2019.02.036) Crossref, ISI, Google Scholar - 12.
Gai PL, Boyes ED . 2009Advances in atomic resolution in situ environmental transmission electron microscopy and 1 Å aberration corrected in situ electron microscopy. Microsc. Res. Tech. 72, 153–164. (doi:10.1002/jemt.20668) Crossref, PubMed, ISI, Google Scholar - 13.
Gai PL (ed.). 1997In-situ microscopy in materials research. In Leading international research in electron and scanning probe microscopies. Google Scholar - 14.
LaGrow AP, Ward MR, Lloyd DC, Gai PL, Boyes ED . 2017Visualizing the Cu/Cu2O interface transition in nanoparticles with environmental STEM. J. Am. Chem. Soc. 139, 179–185. (doi:10.1021/jacs.6b08842) Crossref, PubMed, ISI, Google Scholar - 15.
Stokes DJ . 2008Principles and practice of variable pressure/environmental scanning electron microscopy (VP-ESEM). London, UK: John Wiley & Sons. Crossref, Google Scholar - 16.
Torres EA, Ramírez AJ . 2011In situ scanning electron microscopy. Sci. Technol. Weld. Join. 16, 68–78. (doi:10.1179/136217110X12785889550028) Crossref, ISI, Google Scholar - 17.
Motomura S, Soejima Y, Miyoshi T, Hara T, Omori T, Kainuma R, Nishida M . 2016In situ heating SEM observation of the bainitic transformation process in Cu–17Al–11Mn (at.%) alloys. Microscopy 65, 159–168. (doi:10.1093/jmicro/dfv363) Crossref, PubMed, ISI, Google Scholar - 18.
Garrison WM . 1990Ultrahigh-strength steels for aerospace applications. JOM 42, 20–24. (doi:10.1007/BF03220942) Crossref, ISI, Google Scholar - 19.
Nerle U, Rabinal MK . 2013Thermal oxidation of copper for favorable formation of cupric oxide (CuO) semiconductor. IOSR-JAP 5, 1–7. (doi:10.9790/4861-0510107) Crossref, Google Scholar - 20.
Wan Y, Wang X, Sun H, Li Y, Zhang K, Wu Y . 2012Corrosion behavior of copper at elevated temperature. Int. J. Electrochem. Sci. 7, 7902–7914. ISI, Google Scholar - 21.
Veerababu R, Satya Prasad K, Karamched Phani S, Balamuralikrishnan R, Karthikeya S . 2018Austenite stability and M2C carbide decomposition in experimental secondary hardening ultra-high strength steels during high temperature austenitizing treatments. Mater. Charact. 144, 191–204. (doi:10.1016/j.matchar.2018.07.013) Crossref, ISI, Google Scholar - 22.
Kitahara H, Ueji R, Tsuji N, Minamino Y . 2006Crystallographic features of lath martensite in low-carbon steel. Acta Mater. 54, 1279–1288. (doi:10.1016/j.actamat.2005.11.001) Crossref, ISI, Google Scholar - 23.
Wright SI, Nowell MN, Field DP . 2011A review of strain analysis using electron backscatter diffraction. Microsc. Microanal. 17, 316–329. (doi: 10.1017/S1431927611000055) Crossref, PubMed, ISI, Google Scholar - 24.
Guimarães JRC, Rios PR . 2017Autocatalysis, entropic aspects and the martensite transformation curve in iron-base alloys. Mater. Res. 20, 271–278. (doi:10.1590/1980-5373-mr-2016-0462) Crossref, ISI, Google Scholar - 25.
Celada-Casero C, Sietsma J, Santofimia MJ . 2019The role of the austenite grain size in the martensitic transformation in low carbon steels. Mater. Des. 167, 1–10. (doi:10.1016/j.matdes.2019.107625) Crossref, ISI, Google Scholar - 26.
Brofman PJ, Ansell GS . 1983On the effect of fine grain size on the Ms temperature in Fe-27Ni-O.025C alloys. Met. Trans. A 14, 1929–1931. (doi:10.1007/BF02645565) Crossref, Google Scholar - 27.
Back JG, Surreddi KB . 2019Microstructure analysis of martensitic low alloy carbon steel samples subjected to deformation dilatometry. Mater. Charact. 157, 1–10. (doi:10.1016/j.matchar.2019.109926) ISI, Google Scholar - 28.
Patel JR, Cohen M . 1953Criterion for the action of applied stress in the martensitic transformation. Acta Metal. 1, 531–538. (doi:10.1016/0001-6160(53)90083-2) Crossref, ISI, Google Scholar - 29.
Back JG, Engberg G . 2017Investigation of parent austenite grains from martensite structure using EBSD in a wear resistant steel. Materials (Basel) 10, 1–15. (doi:10.3390/ma10050453) ISI, Google Scholar - 30.
Terasaki H, Shintome Y, Takada A, Komizo Y, Morito S . 2015In-situ characterization of martensitic transformation in high carbon steel under continuous-cooling condition. Mater. Today Proc. 2S, S941–S944. (doi:10.1016/j.matpr.2015.07.437) Crossref, Google Scholar - 31.
Kung CY, Rayment JJ . 1982An examination of the validity of existing empirical formulae for the calculation of M S temperature. Metall. Mater. Trans. A 13, 328–331. (doi:10.1007/BF02643327) Crossref, ISI, Google Scholar - 32.
Koistinen DP, Marburger RE . 1959A general equation prescribing the extent of the austenite-martensite transformation in pure iron-carbon alloys and plain carbon steels. Acta Metall. 7, 59–60. (doi:10.1016/0001-6160(59)90170-1) Crossref, ISI, Google Scholar - 33.
Lin Y, Laughlin DE, Zhu J . 2017A study of the determination of grain boundary diffusivity and energy through the thermally grown oxide ridges on a Fe-22Cr alloy surface. Phil. Mag. 97, 535–548. (doi:10.1080/14786435.2016.1263403) Crossref, Google Scholar - 34.
- 35.
Schmidt-Whitley RD, Martinez-Clemente M, Revcolevschi A . 1974Growth and microstructural control of single crystal cuprous oxide Cu2O. J. Cryst. Growth 23, 113–120. (doi:10.1016/0022-0248(74)90110-9) Crossref, ISI, Google Scholar - 36.
Zhou G, Wang L, Yang JC . 2005Effects of surface topology on the formation of oxide islands on Cu surfaces. J. Appl. Phys. 97, 1–6. (doi:10.1063/1.1861147) Crossref, ISI, Google Scholar - 37.
Mochrie SGJ . 1987Thermal roughening of the copper (110) surface: an x-ray diffraction experiment. Phys. Rev. Lett. 59, 304–307. (doi:10.1103/PhysRevLett.59.304) Crossref, PubMed, ISI, Google Scholar - 38.
Lawless KR, Miller GT . 1959The epitaxial relationships of cuprous oxide formed on copper single crystals immersed in an aqueous solution of copper sulfate. Acta Cryst. 12, 594–600. (doi:10.1107/S0365110X59001736) Crossref, Google Scholar - 39.
Gao Z, Cao J, Wang C, Chen Y, Muzammal HM, Wang W, Sun H, Ma H, Wang Y . 2020Effect of Cu preferential orientation on the microstructure and property of anodized CuxO film. Eur. J. Inorg. Chem. 2020, 261–268. (doi:10.1002/ejic.201901084) Crossref, ISI, Google Scholar - 40.
Shang PJ, Liu ZQ, Pang XY, Li DX, Shang JK . 2009Growth mechanisms of Cu3Sn on polycrystalline and single crystalline Cu substrates. Acta Mater. 57, 4697–4906. (doi:10.1016/j.actamat.2009.06.025) Crossref, ISI, Google Scholar - 41.
Gao J, Hu A, Li M, Mao D . 2009Influence of crystal orientation on copper oxidation failure. Appl. Surf. Sci. 255, 5943–5947. (doi:10.1016/j.apsusc.2009.01.040) Crossref, ISI, Google Scholar - 42.
Yang JC, Kolasa B, Gibson JM . 1998Self-limiting oxidation of copper. Appl. Phys. Lett. 73, 2841–2843. (doi:10.1063/1.122608) Crossref, ISI, Google Scholar
