Evolutionary mode for the functional preservation of fast-evolving Drosophila telomere capping proteins

DNA end protection is fundamental for the long-term preservation of the genome. In vertebrates the Shelterin protein complex protects telomeric DNA ends, thereby contributing to the maintenance of genome integrity. In the Drosophila genus, this function is thought to be performed by the Terminin complex, an assembly of fast-evolving subunits. Considering that DNA end protection is fundamental for successful genome replication, the accelerated evolution of Terminin subunits is counterintuitive, as conservation is supposed to maintain the assembly and concerted function of the interacting partners. This problem extends over Drosophila telomere biology and provides insight into the evolution of protein assemblies. In order to learn more about the mechanistic details of this phenomenon we have investigated the intra- and interspecies assemblies of Verrocchio and Modigliani, two Terminin subunits using in vitro assays. Based on our results and on homology-based three-dimensional models for Ver and Moi, we conclude that both proteins contain Ob-fold and contribute to the ssDNA binding of the Terminin complex. We propose that the preservation of Ver function is achieved by conservation of specific amino acids responsible for folding or localized in interacting surfaces. We also provide here the first evidence on Moi DNA binding.

BV, 0000-0001-6981-0026; IMB, 0000-0001-8504-9687 DNA end protection is fundamental for the long-term preservation of the genome. In vertebrates the Shelterin protein complex protects telomeric DNA ends, thereby contributing to the maintenance of genome integrity. In the Drosophila genus, this function is thought to be performed by the Terminin complex, an assembly of fast-evolving subunits. Considering that DNA end protection is fundamental for successful genome replication, the accelerated evolution of Terminin subunits is counterintuitive, as conservation is supposed to maintain the assembly and concerted function of the interacting partners. This problem extends over Drosophila telomere biology and provides insight into the evolution of protein assemblies. In order to learn more about the mechanistic details of this phenomenon we have investigated the intra-and interspecies assemblies of Verrocchio and Modigliani, two Terminin subunits using in vitro assays. Based on our results and on homology-based three-dimensional models for Ver and Moi, we conclude that both proteins contain Ob-fold and contribute to the ssDNA binding of the Terminin complex. We propose that the preservation of Ver function is achieved by conservation of specific amino acids responsible for folding or localized in interacting surfaces. We also provide here the first evidence on Moi DNA binding.

Introduction
The increasing number of sequenced species has greatly accelerated progress in the field of protein evolution studies. The accumulated knowledge has caused a shift in the earlier held concept that ancient proteins are more conserved, while younger ones are characterized by signs of accelerated evolution. According to the presently held view, in addition to phylogenetic age, several other factors, such as expression level, protein importance and connectivity, also affect the speed of evolution [1][2][3][4][5][6] (summarized in [7]). Despite these interesting findings, it is still generally accepted that most of the proteins that participate in fundamental cellular functions, such as transcription, translation or replication, are ancient and well conserved [1]. Conservation suggests strong selection acting on these sequences; one could say that a minor change in the sequence is enough to compromise the function of these multi-protein machineries.
Telomere maintenance has a particularly fascinating relation to replication and would be expected to be conserved. Nonetheless, different variations of telomere maintenance have evolved [8]. A common element of these is that repeats of sequences form the specific telomeric DNA and proteins bind to these sequences. The participating proteins form a DNA protecting cap and contribute to the elongation of telomeric DNA. Besides preventing DNA loss due to activities of exonucleases from chromosome ends, the protective cap also prevents chromosome fusions. The ends of linear chromosomes resemble DNA double-stranded breaks; therefore, without telomere capping the DNA repair mechanisms would recognize and fuse those, causing genomic instability [9]. Proteins are also needed to elongate the telomeric DNA in order to solve the 'end replication problem' which otherwise would cause progressive telomere shortening with successive cycles of DNA replication. The 'end replication problem' arises from the inability of the replication machinery to completely synthetize the lagging strand after the removal of the last RNA primer at a chromosome end [10,11]. Most eukaryotes use a specific reverse transcriptase called telomerase to elongate DNA at chromosome ends. Telomerase uses its own RNA as template repeatedly to synthesize tandem repeats of a short GC rich sequence, constituting telomeric DNA [12,13]. Due to the activities of telomerase and the replication machinery, telomeric DNA consists of double-stranded (ds) and single-stranded (ss) regions. In most organisms with telomerase, proteins of the Shelterin complex bind to repeats of the telomeric DNA, forming a protective cap on telomeres and regulating telomeric DNA elongation [9]. However, besides telomerase and Shelterin, other means of telomere elongation and protection are also known [8,14,15]; Drosophila, for example, have lost telomerase during evolution and solve the end replication problem by integration of three telomeric retrotransposons at chromosome ends. These 'domesticated' transposons, HeT-A, TART and TAHRE form arrays of repeats at telomeric regions [16,17]. As a consequence, in the absence of short telomeric repeats, in flies sequence-specific DNA binding of Shelterin-like proteins cannot provide telomere protection. Instead, Drosophila species use a functionally analogous but evolutionarily new complex called Terminin, which binds to DNA in a sequence-independent manner to provide the protective cap required for preventing chromosome fusions. As such, in Drosophila Terminin fulfils the same role as Shelterin in other organisms [18].
The Terminin complex is hypothesized to consist of four fast-evolving and one conserved subunit, which are HOAP [19], HipHop [20], Verrocchio (Ver) [21], DTL [22]/Modigliani (Moi) [23] and HP1 [24], respectively. From these proteins, two stable subcomplexes can be assembled in vitro (HOAP-HipHop-HP1 and Ver-Moi), but not a full Terminin complex [25]. Zhang et al. [26] recently described another protein, Tea, which interacts with Moi and Ver, forming the Moi-Tea-Ver (MTV) complex. MTV is believed to contribute to telomere maintenance and Tea was found to be essential for the DNA binding of MTV. In parallel Cicconi et al. [27] showed that a Ver homodimer is able to bind ssDNA, while Moi has no ssDNA binding activity. It remains an open question whether MTV and HOAP-HipHop-HP1 are two distinct complexes or are both subcomplexes of a Terminin holocomplex. Nevertheless, as these assemblies are linked by the shared function of telomere capping and maintenance, we consider each of these proteins as components of the Terminin complex. Although both Terminin subcomplexes bind to DNA in a sequence-independent manner, they differ in their affinity towards different DNA structures: HOAP-HipHop-HP1 binds to dsDNA, while MTV binds ssDNA [20,26,27].
Terminin proteins fulfil the same function of telomere capping as Shelterin, however, Terminin subunits evolve significantly faster than Shelterin proteins do (electronic supplementary material, figure S1). This contradiction was noted and Saint-Leandre et al. [28] suggested that the fast evolution of the HOAP protein was caused by the adaptive evolution required to silence telomeric transposons. While this might explain the driving force behind the paradox, the question of how the function of the fast-evolving proteins is preserved remains unanswered. We sought a solution for this puzzle by identifying conserved regions of a Terminin subunit Ver, and by analysing interactions between selected components of Terminin and DNA. Based on our results we suggest that Terminin proteins preserve their functions because despite their overall fast evolution, they maintain conserved structure and surfaces required for interactions.

Both intra-and interspecies Ver-Moi subcomplexes
of Terminin show preferential binding to ssDNA Co-expression of the Ver and Moi proteins in bacteria helped to overcome solubility problems and permitted the study of the DNA binding properties of their dimer. Using biolayer interferometry (figure 1a), we found that the Ver-Moi dimer indeed preferably binds ssDNA (figure 1b). We detected a weaker interaction with dsDNA as well. The Ver-Moi-ssDNA binding curve reveals binding kinetics that can be described with the heterogeneous ligand model (2 : 1). This suggests that the Ver-Moi complex has two surfaces which bind ssDNA with different kinetics and affinity (figure 1c).
As the DNA binding property of Ver is known [27] we can assume that the second surface is related to Moi (figure 1d). It would be expected that fast evolution will result in functional anomalies within hybrid complexes formed between proteins of different species. To test the DNA binding of the hybrid dimer formed between Drosophila yakuba Ver and Drosophila melanogaster Moi we used affinity pull-down experiments. Drosophila yakuba and D. melanogaster are closely related and able to produce infertile offspring [29]. The amino acid identity between their Ver proteins, however, is only 83.17%, in contrast with some other proteins with conserved functions, such as the centromere-associated protein Borr (96.5%), heterochromatin associated protein HP1a (94,17%), protein kinase Raf1 (99.59%) or cytoskeletal protein Moesin (100%). Nonetheless, the D. yakuba Ver-D. melanogaster Moi hybrid has similar DNA binding properties as the D. melanogaster complex (figure 1e).

Structural model of Ver permits identification of important conserved regions
The cross-species functional conservation of fast-evolving Terminin proteins suggests that they have conserved interacting surfaces. Sequence level comparison, however, indicates only seemingly sporadic distribution of conserved amino acids, though these might form interacting surfaces when the protein is properly folded. Ver shares similarities with Ob-fold proteins, among which many are able to bind DNA, RNA or proteins as well [30]. Ob-folds, described first in oligosaccharide binding proteins, are domains consisting of a beta barrel of five antiparallel beta strands capped with an alpha-helix [31]. The similarity of Ver to known Ob-fold structures permitted us to create structural models for the protein. This allowed identification of all conserved surfaces along the molecule (figure 2). We were able to predict very similar models using Ver sequences from different species (figure 2b).  royalsocietypublishing.org/journal/rsob Open Biol. 11: 210261  royalsocietypublishing.org/journal/rsob Open Biol. 11: 210261 The Ver structure model indicates that conserved amino acids, which are scattered on the linear sequence, are in positions important for function. Almost all buried amino acids and those known to be responsible for intra-molecular interactions are conserved. The rest of the conserved amino acids are enriched at different surface regions. For the N-terminal region, the structural prediction is poor. This segment is connected to the Ob-fold by a loop structure, suggesting that it is a flexible region (figure 2a). This layout is reminiscent of a nuclear localization signal (NLS), which needs to be easily accessible. Indeed, cNLS Mapper software identified this conserved region as an NLS (electronic supplementary material, table S1).
Three further putative interacting surfaces can be identified in the structure. The surface made by amino acids in Group 1 (yellow) is a region with rather poor structure prediction and unknown function. The helix that supports the Obfold structure has conserved hydrophobic amino acids that are exposed on the surface (amino acids in Group 2, orange). The last conserved surface is predicted to be responsible for DNA binding, based on its similarities to RPA70 [21]. Amino acids in Group 3 (green) are responsible for forming this region.

The identified surfaces are involved in Ver function
In order to investigate the role of the identified surfaces of Ver, we generated mutant versions of the protein by introducing deletions into a Ver-Moi bicistronic pET vector. We completely removed the uncharacterized helixes (Group 1-M1-Ver) or partially deleted the Ob-fold supporting helix (Group 2-M2-Ver) and the DNA binding surface (Group 3-M3-Ver; figures 2e and 3c), while leaving the Moi coding sequence unchanged. Ver and its mutant versions were N-terminally tagged with Flag, and Moi was tagged at its C-terminal with haemagglutinin (HA), in order to facilitate immunodetection of the proteins on western blots. Additionally, the Flag tag on the N-terminal part of Ver also serves as an epitope for immune-affinity purification. The proteins were co-expressed in bacteria and co-purification of the subunits, as an indicator of complex assembly, was studied (figure 3b).
During heparin-sepharose column chromatography of cell lysates containing wild-type Ver and Moi, dimers of the proteins eluted at low salt concentration at 280-325 mM (in fractions 6 and 7). Deletion of the Group 1 surface of Ver (M1) did not affect its interaction with Moi as the proteins eluted together. However, the affinity of M1-Ver-Moi dimer to the column increased due to the deletion, as the dimer eluted at a higher salt concentration (between 325 and 415 mM in fractions 7-9) than the wild-type proteins.
Deletion of the Group 2 region resulted in a lower yield of soluble proteins; furthermore, it weakened Ver-Moi interaction as M2-Ver co-purified with Moi only partially and the majority of the two proteins eluted at different salt concentrations. The elution pattern of M3-Ver mutant protein (Group 3) was similar to that of M2-Ver; however, the stability of the dimer was affected less, since the majority of the proteins co-eluted at 280-325 mM (fractions 6 and 7).
During Flag immune-affinity purification wild-type Ver, M1-Ver and M3-Ver mutant proteins co-purified with Moi near 1 : 1 stoichiometry. M2-Ver mutant on the other hand bound less Moi (figure 3d,f ). A significant amount of Cpn60 chaperone also co-purified with these proteins. Curiously a buffer change from TBS to PBS altered the Ver/Moi ratio of the complexes (figure 3e,f ).
In order to determine whether the deletions influenced the stability of Ver, we performed thermal unfolding experiments using immune-purified protein samples (see electronic supplementary material, figure S2). Ver and Moi both contain one tryptophan residue, therefore their transition from hydrophobic to hydrophilic environment could be tracked based on fluorescence intensity changes at 350 and 330 nm. (The Cpn60 present in the protein samples contains no Trp residue, therefore it does not produce significant signal in these assays.) In wild-type heterodimers, we detected two transition events corresponding to the denaturation of Ver or Moi. The M1-Ver mutant showed identical and the M3-Ver mutant a similar denaturation event to the wildtype Ver. In the case of the M2-Ver mutant, the first event was not detected since the deletion altered the position of the Trp residue that provided the signal in other versions of Ver.
To determine the effect of Ver mutations on the DNA binding of Ver-Moi dimers we performed DNA affinity pull-down experiments (figure 4a). We found that the mutations did not cause major changes in DNA preference and most heterodimers bound to ssDNA. Comparisons between binding affinities of mutants by this technique was, however, complicated to some extent by the fact that low levels of binding were also detected on control empty beads. Therefore, we used another technique to evaluate the binding affinity of mutants. Results of electrophoretic mobility shift assays (EMSA) did not indicate significant differences in the binding affinities of wild-type and mutant Ver-Moi dimers to ssDNA (figure 4b). The mutations did not abolish DNA binding and each mutant formed DNA-protein complexes with various mobility in a concentration-dependent manner. Our trials to identify protein components of the complexes by detecting supershifts with the use of antibodies for Ver and Moi unfortunately did not produce clear results. Nonetheless, the multiplicity on detected complexes supports the assumption of multiple DNA binding surfaces within the heterodimer.

Discussion
Subunits of Terminin are among the fastest evolving proteins of Drosophila [20,34]. Recently, a molecular cause that might explain this has been suggested in the utilization of telomeric retrotransposons, which are required for telomere maintenance [35]. Since transposons evolve fast due to the low fidelity of their reverse transcriptase, the proteins that keep their replication at bay must also have fast evolution. A similar phenomenon is seen in the case of viruses and proteins involved in the response to viral infection [35,36]. The positive selection could eventually result in divergent evolution, which decreases the compatibility of proteins from different species [28]. Similarly, the coevolution of telomeric proteins and their DNA targets might also have interesting implications regarding species evolution [25,37].
It is puzzling how Drosophila telomere-associated proteins are able to maintain their function despite massive changes in amino acid composition [18,25]. One can envision two general scenarios by which interacting proteins can preserve affinity towards each other (figure 5). The first could be that coevolution maintains the conserved function since a change in one molecule is paired with a compensatory royalsocietypublishing.org/journal/rsob Open Biol. 11: 210261 change in its interacting partner. Indeed, fast-evolving proteins can co-evolve and mutual changes in the interacting partners keep their complexes intact [38,39]. Assuming this scenario, the preservation of interaction between fast-evolving homologues from different species is not expected. However, we could show interaction between D. yakuba Ver and D. melanogaster Moi proteins. The existence of functional hybrid complexes such as the D. yak-Ver-D. mel-Moi suggests that coevolution is not the only way to preserve interaction between fast-evolving molecules. Another possible mechanism could be that interacting surfaces needed for function are not affected by the accelerated evolution. The speed of evolution (d-f ) By immune-affinity chromatography both wild-type and mutant Ver proteins co-purified with Moi. However, buffer composition changed the Ver : Moi ratio. In samples that contained M2-Ver less Moi was present. In PBS buffer the proportion of M1-Ver and Moi is also shifted to higher Ver : Moi ratio. Some Cpn60 chaperones also co-purified with the Ver-Moi heterodimers. E: elution.
royalsocietypublishing.org/journal/rsob Open Biol. 11: 210261 of different protein domains even within the same protein can differ greatly [25]. Disordered regions like hinges and loops usually change much faster than globular parts [40]. Thus, a fast-evolving protein might consist of extensive disordered regions and conserved region(s) which preserve function. In theory, conserved folds and surfaces are sufficient to maintain interaction between proteins. Fast evolution at protein regions forming loop structures is commonly detected [40], since multiple amino acids could be substituted in loops without destroying the structure. Similarly, multiple alpha-helix-or beta-sheet-forming amino acids could be interchanged without causing damage to the secondary structure. Consequently, as long as the structure is not affected by the mutations, the interacting surfaces are also preserved ( figure 5).
The structural model of Ver shows conserved hydrophobic amino acids buried inside the structure ( figure 2c,d). This hydrophobic core most probably facilitates the correct positioning of the beta-sheet elements contributing thus to the Ob-fold formation. Modelling of Ver structures from different species predicts similar folds, indicating the conservation of the   royalsocietypublishing.org/journal/rsob Open Biol. 11: 210261 Ob-fold despite significant differences in amino acid sequences (figure 2b). Other conserved amino acids positioned on the surface can be involved in intermolecular interactions. In the structural model of Ver, in addition to a conserved surface on the N-terminal that we propose to be a NLS, we identified three regions that deserve attention as possible determinants of interactions with DNA and/or Moi. Ver was described to bind DNA as a homodimer [27], but was also suggested to be functional only as a member of the MTV complex [26]. We found that Ver-Moi heterodimer is able to bind ssDNA in the absence of Tea. Thus, our result supports a role of the Ver-Moi complex in telomere organization in association with ssDNA and questions the role of Tea in DNA binding. Tea might have a chaperone-like function, in which it was replaced by Cpn60 in our experimental setup. According to our data, the Ver-Moi dimer has two DNA binding surfaces, suggesting that Moi also has DNA binding activity. The low solubility of Moi, however, precludes direct detection of its DNA binding by affinity pull-down. Nevertheless, apart from the results of BLI and EMSA, the results of Far western experiments also indicate that Moi is able to bind DNA. In our experiments Moi as well as Ver-Moi dimer interacted with H1 histone. However, Moi interaction with H1 was DNA dependent. Overall, these results support that Moi also has affinity to bind DNA. A deletion we introduced in the putative DNA binding surface of Ver had minimal effect on the DNA binding properties of the Moi-Ver complex in vitro. This could indicate that the DNA binding surface is much larger than we anticipated, or another surface is responsible for the interaction with the DNA. The crystal structure of the CDC13 protein indicates the involvement of a large surface in DNA binding as the ssDNA wraps around half of the Ob-fold domain [41]. The stability of the M3-Ver mutant was slightly different from that of wild-type Ver, suggesting that the mutation caused minor alteration in the fold of the protein. This could also explain the slight difference observed in the elution profile from the heparin-sepharose column.
Deletion of the uncharacterized helices (Group 1) (M1-Ver) resulted in a Ver with higher affinity to heparin but the similar affinity to DNA (figures 3 and 4). Though the deletion increased the solubility of the protein, the thermo stability of M1-Ver and wild-type Ver was identical, indicating that the Ob-fold was not affected by this mutation.
Deletion of the Group 2 region (M2-Ver) caused the most serious alterations in Ver molecular behaviour. In affinity pull-down experiments, a stronger binding to beads resulted in a change in elution profile; however, the complex was still able to bind DNA. For the C-terminal helix, a role in Ver-Ver dimerization has been suggested, and it was shown that a mutation in it prevents Ver from forming homodimers and as a result, binding DNA [27]. The proposed surface of Ver-Ver interaction is not the conserved surface in our model. Flag immuno purification indicated that M2-Ver interacted with Moi, during heparin-sepharose column chromatography, however, M2-Ver and Moi did not co-purify. This indicates that the C-terminal helix has an important role both in homo-and heterodimer formation. Since Ver preferentially forms heterodimers in the presence of Moi [25,26] and a deletion in the C-terminal helix diminished both Ver-Ver [27] and Ver-Moi interactions, we conclude that surfaces involved in these interactions extend to the C-terminal helix and at least partially overlap.
In summary, we showed that the structure predictions of rapidly evolving Ver protein from different species resulted in similar folding despite large differences in the sequences (figure 2b). The hydrophobic amino acids buried in the folded protein structure are conserved (figure 2c,d), suggesting that a limited conservation of specific amino acids is sufficient to maintain the correct shape of the protein. Some of the selected surfaces can be well associated with functions (N-terminal: NLS; Group 2: Moi-interacting surface). The role of further preserved surfaces might be in interactions with other Terminin and related proteins (Tea, Nap1, SSe, RPA70 or CG7341 [21,26,27,42]).
Due to the highly accurate protein structure predictions available in the AlphaFold database [43] we could conclude that similarly to Ver, Moi is also an Ob-fold protein (electronic supplementary material, figure S3), and we were able to dock Moi to Ver by taking advantage of its high resemblance to the Stn1-Ten1 dimer (electronic supplementary material, figure S3). The model fits with our experimental data since M2 mutation partially affects this surface. Most of the amino acids that participate in the interaction are conserved ( figure 6). Thus, in silico structure predictions and the existence of a functional hybrid complex support our hypothesis that the preservation of Ver-Moi function in the fast-evolving Terminin complex is the result of the conservation of amino acids at key positions. These amino acids ensure the correct protein folding and by that allow the formation of the proper interacting surfaces.

Cloning and heterologous protein expression
To generate mutant versions of the Ver protein, alterations were introduced into the coding region by PCR mutagenesis in previously constructed expression constructs [25]. Primers used for this are listed in electronic supplementary material, table S2. Protein production was done in Arctic express cells, DE3 (Agilent Technologies) at 10-18°C, with induction by 0.3 mM IPTG final concentration for 24-60 h.
Moi-HA cDNA was cloned in pAcUW21 vector using classic molecular biological methods. HA-Moi expressing baculovirus strain was constructed using the Baculovirus Gold kit (BD Biosciences). The viral clones were selected by the dilution method. The most promising strains were used to infect Sf9 cells. The cells were grown in TNM-FH insect culture medium (Sigma), supplemented with 10% FCS and antibiotics and collected 3 days after infection.

Protein purification
Bacterial cells were lysed by sonication using Sonics Vibra cell apparatus. Each sample was sonicated by six cycles, 20 s each with 10 s breaks at 45% amplitude in buffer I (25 mM Tris HCl pH 7.5, 100 mM NaCl, 1 mM CaCl 2 , 1 mM MgCl 2 ).
Cell extracts were cleared by centrifugation and filtration through G75 Sephadex beads (GE Healthcare) and loaded to the heparin-sepharose column (GE Healthcare). Proteins were eluted by a 0.1-1 M NaCl gradient in 20 mM Tris pH 7.5 in 20 ml and 1 ml fractions were collected.
Relevant fractions from the heparin-sepharose column were loaded to the anti-FLAG M2 affinity matrix (Sigma-Aldrich) to perform immune-affinity purification. The beads were washed with buffer I or PBS (137 mM NaCl, 2.7 mM KCl, 10 mM Na 2 HPO 4 , 1.8 mM KH 2 PO 4 ). Elution was performed with 150 µg ml −1 3× Flag peptide (Sigma) in buffer I or PBS.  [44]. For visualization gels were stained in Coomassie brilliant blue or western blot was performed.

Gel electrophoresis and Western blot
For western blot, the proteins were transferred to a nitrocellulose membrane (0.45 um, GE Healthcare). For blocking the membrane low-fat milk (5%), as primary and secondary antibodies Rabbit anti-HA (Abcam, Ab9110) or mouse anti-Flag M2 (Sigma F3165) and HRP conjugated antibodies (Dako P0448, P0260) were used, respectively. Immobilon Chemiluminescent HRP substrate (Millipore) and Li-Cor western Blot scanner were used to detect light signals. Western blots were quantitatively evaluated by ImageJ. The uncropped western blots are shown in electronic supplementary material, figure S3.

Determination of thermal stability
The thermal stability of the Ver-Moi complexes were determined with Prometheus NT.48 (Nanotemper) in buffer I.

DNA binding
DNA binding assays were based on immobilization taking advantage of the fact that biotin labelled oligonucleotides bind effectively to streptavidin-coated surfaces. An 80 nucleotide (nt) long biotin labelled single-stranded DNA with low propensity to form secondary structures was generated and with the use of an oligonucleotide with complementary sequence (electronic supplementary material, table S2), double-stranded (ds) DNA (80 nt) or dsDNA with a 3 0 overhang structure (40-40 nt) bound to the same matrix was formed.
For affinity pull-down assay biotinylated DNAwas bound to streptavidin covered magnetic beads (Dynabeads M280 Streptavidin, Thermo). Partially purified Ver-Moi dimers eluted from the heparin-sepharose column were incubated with the oligonucleotide-containing beads at 4°C, overnight. The beads were washed with buffer I, and the bound proteins were eluted with a buffer that contained 1 M NaCl, 25 mM Tris HCl pH 7.5, 1 mM CaCl 2 , 1 mM MgCl 2 , and analysed by western blot. The blots were evaluated with ImageJ. Two-tailed paired Student's t-test was applied to calculate significance.
For Biolayer interferometry biotinylated oligonucleotides (3 µg ml −1 ) were bound to a streptavidin covered sensor (SAX sensor, Fortébio). Protein samples were prepared in PBS buffer (137 mM NaCl, 2.7 mM KCl, 10 mM Na 2 HPO 4 , 1.8 mM KH 2 PO 4 ) supplemented with 0.05% Tween 20. After the binding step the surface was blocked with 10 µg ml −1 biocitin (Sigma), the baseline was measured in royalsocietypublishing.org/journal/rsob Open Biol. 11: 210261 the buffer and the data was collected. We used the Octet system (FortéBio) and its software for evaluation.
EMSA were performed using LightShift Chemiluminescent EMSA Kit (ThermoFisher). In total, 20 fmol biotinylated ssDNA was used in each reaction. Ver-Moi protein concentrations varied from 5.55 to 0.35 µM, produced by two-fold serial dilution. Binding reactions were done in PBS buffer (137 mM NaCl, 2.7 mM KCl, 10 mM Na 2 HPO 4 , 1.8 mM KH 2 PO 4 ) supplemented with 0.05% Tween 20, for 15 min at room temperature. Electrophoresis was performed on 7.5% acrylamide gel in 0.5× TBE buffer. Signals were detected following the instructions of the manufacturer using Li-Cor western blot scanner.

Sequence analysis and three-dimensional modelling
Ver three-dimensional structures were built using Phyre2 [32]. The model was visualized by UCSF Chimera [45]. The conservation of the amino acids was calculated based on 21 Drosophila orthologues [25]. The NLS was determined by the cNLS Mapper software using 3.0 cut-off value [46]. Structures predicted by the machine-learning algorithm were obtained from AlphaFold Protein Structure Database [43]. Protein docking was performed on the HADDOCK2.4 webserver using basic settings [47,48].

Far western
Query proteins were separated on tricine-SDS-PAGE, transferred to a nitrocellulose membrane and the membrane was soaked in buffer (5% milk powder, 20 mM Tris pH 7.5, 100 mM NaCl, 1 mM MgCl 2 , 1 mM CaCl 2 ) to prevent nonspecific binding of the probe. The HA-Moi protein probes were produced in Sf9 cells using recombinant baculovirus. Ver-Moi-HA heterodimer probes were expressed in bacteria. Cell extracts of both Sf9 and bacterial cells were prepared by sonication, cleared by centrifugation and used as probe. The extracts were mixed at 1 : 9 ratio with binding buffer (with or without Benzonase (Merck)) and incubated on the membrane overnight at 4°C. Next, the membrane was washed in TBST (20 mM Tris, 150 mM NaCl, 0.05% Tween 20) and incubated with the primary antibody specific for the HA epitope present on the probe (Abcam, Ab9110). Further steps were done as those described for western blots.
Data accessibility. This article has no additional data.