The cervical anatomy of Samotherium, an intermediate-necked giraffid

Giraffidae are represented by many extinct species. The only two extant taxa possess diametrically contrasting cervical morphology, as the okapi is short-necked and the giraffe is exceptionally long-necked. Samotherium major, known from the Late Miocene of Samos in Greece and other Eurasian localities, is a key extinct giraffid; it possesses cervical vertebrae that are intermediate in the evolutionary elongation of the neck. We describe detailed anatomical features of the cervicals of S. major, and compare these characteristics with the vertebrae of the two extant giraffid taxa. Based on qualitative morphological characters and a quantitative analysis of cervical dimensions, we find that the S. major neck is intermediate between that of the okapi and the giraffe. Specifically, the more cranial (C2–C3) vertebrae of S. major represent a mosaic of features shared either with the giraffe or with the okapi. The more caudal (C5–C7) S. major vertebrae, however, appear transitional between the two extant taxa, and hence are more unique. Notably, the C6 of S. major exhibits a partially excavated ventral lamina that is strong cranially but completely absent on the caudal half of the ventral vertebral body, features between those seen in the giraffe and the okapi. Comprehensive anatomical descriptions and measurements of the almost-complete cervical column reveal that S. major is a truly intermediate-necked giraffid. Reconstructions of the neck display our findings.


Introduction
The giraffe (Giraffa camelopardalis) is a spectacular mammal for its extremely long neck. The giraffe cervical vertebrae perceptibly exceed the length of necks of living and extinct ruminants. However, the only other living giraffid, the okapi  [2] for vertebral terminology and descriptions).
We perform ANOVA tests with post hoc analysis to compare cervical vertebral measurements and characters between S. major, G. camelopardalis and O. johnstoni using SPSS v. 22. Using a Bonferroni correction adjusting for 18 tests, statistical significance is set at the 0.0028 level. Characters in which O. johnstoni is not significantly different from S. major indicate a morphologic similarity between these taxa (likewise between G. camelopardalis and S. major). Characters in which S. major is not significantly different from both O. johnstoni and G. camelopardalis indicate an intermediate state between that of the two extant taxa. We subdivide the neck into two parts; these tests are performed evaluating features of the cranial (C2-C3) and caudal (C5-C7) cervical vertebrae.

Description of Samotherium major cervical vertebrae
Atlas (figure 2). The vertebra comprises a dorsal and ventral arch, replacing the vertebral body, lamina and pedicle. The dorsal tubercle is positioned centrally as an expanded bony concentration on the dorsal arch, and it is shorter than the ventral tubercle. The cranial margin of the dorsal and ventral arches is U-shaped, and the ventral caudal margin forms a transverse edge. The caudal margin of the dorsal arch terminates on the same plane as that of the ventral arch. In lateral view, the alar wing is thin, sigmoid shaped and slanted dorsally. The lateral wall of the alar wings is slightly excavated, and the single midline ventral tubercle presents as a large bulge on the caudal margin of the ventral arch, which protrudes caudally. The ventral lamina exceeds the length of the dens. In cranial view, there is a concavity in the cranial vertebral foramen that corresponds to an inner-lateral notch on the articular facet for the occipital condyles.
Axis (figure 2). In dorsal view, the position of greatest thickness of the spinous process is central/caudal, and the dorsal articular facets are approximated towards the midline. The spinous process is arched, inclined caudally, and has a notch on the cranial edge. The cranial edge of the spinous process is positioned caudal to the cranial edge of the dens. The dens is concave on the dorsal surface, forming a trough. It has a flattened, transverse cranial end and extends cranial to the cranial most edge of the spinous process. The caudal articular facets are oval shaped. In lateral view, the dorsal tubercle protrudes from the caudal vertebral body, and connects to the transverse process with a strong, thickened ridge. The ventral ridge is continuous throughout the length of the vertebral body. It terminates caudally in a lateral expansion of bony material. C3 ( figure 3). In dorsal view, the spinous process is situated at the base of the cranial articular processes. It is bifid with a flattened apex and is directed cranially. The spinous process extends the   majority of the length of the dorsal vertebral body. Three distinct ridges radiate from the caudal aspect of the spinous process onto the dorsal lamina. The cranial articular facets are oriented dorsomedially and are rounded. The cranial articular process is elongated and tubular shaped. The cranial articular process and facet extend cranially to the same level as the tip of the cranial bulge. In lateral view, the transverse process forms a thickened, distinct, curved ridge, which presumably would connect to the dorsal tubercle. Although the dorsal tubercle is broken, the post-tubercular ridge indicates that the protrusion is situated on the caudal aspect of the vertebra. The ventral tubercle is also broken, but the base indicates that it was directed cranially. In lateral view, the caudal aspect of the vertebra is notably larger than the cranial part. In ventral view, the cranial end of the vertebra is narrower than the caudal end. The cranial bulge is domed and spherical. The cranial bulge has an elongated triangular bony expansion onto the cranial ventral vertebral body, termed the ventral extension. The ventral ridge is prominent and continuous longitudinally on the vertebral body.  . In dorsal view, the thickest concentration of bony material on the spinous process is situated between the bases of the cranial articular processes. The spinous process extends the majority of the length of the dorsal vertebral body. Similar to C3, there are three ridges radiating from the caudal aspect of the spinous process, but these ridges are less prominent. In lateral view, the spinous process is oriented cranially and is relatively short. The dorsal lamina has a concavity lateral to the spinous process. The transverse process protrudes more laterally than the dorsal lamina and is visible in dorsal view. The cranial articular process is elongated and tubular, and the cranial articular facet is rounded. The dorsal tubercle is large, crescent-shaped and aligned with the transverse process. The dorsal tubercle is very caudal on the vertebra, and it connects to the transverse process with a curved ridge. Together, these two structures form a large, laterally flattened surface. Although the ventral tubercle is broken, it is evident from the base that it is oriented strongly cranially. A step separates the ventral tubercle from the dorsal tubercle and transverse process. In certain specimens, the cranial end of the ventral vertebral body is significantly narrower than the caudal end, and the intertubercular plate connecting the two ends is curved and sigmoid shaped. In other specimens, the ventral vertebral body is more rectangular, with the intertubercular plate oriented linearly from cranial to caudal. The caudal aspect of the intertubercular plate expands laterally. There is a fossa on the ventral vertebral body, ventral to the dorsal tubercle and transverse process. The caudal margin of the ventral vertebral body terminates in a transverse edge. The ventral extension of the cranial bulge is less elongated and prominent than in C3. The ventral ridge is less prominent than C3 but is still continuous longitudinally. At the caudal margin, the ventral ridge expands bilaterally.
C6 ( figure 4). The thickest portion of the spinous process is situated at the base of the cranial articular processes. The base of the spinous process is more massive and expanded on the caudal aspect of the dorsal lamina. In lateral view, the spinous process is more elongated than the more proximal cervical vertebrae, and it is oriented cranially. The dorsal lamina has a concavity lateral to the spinous process. The cranial articular processes are wider and shorter than those of the more proximal cervical vertebrae, and the facets themselves remain rounded and oriented dorsomedially. There is a dorsal tubercle on the same plane as the ventral tubercle, and an accessory dorsal tubercle directly caudal to the transverse process, which presents as a curved ridge. Both the dorsal tubercle and the accessory dorsal tubercle are connected to the caudal vertebral body with an elevated post-tubercular ridge. Although portions are fragmented, the ventral tubercle appears as a distinct protrusion, rather than part of the expanded ventral lamina of a typical C6. Instead, the ventral tubercle connects to the dorsal tubercle with the intertubercular plate seen in C3-C5, and there is a notch on the lateral wall. The ventral tubercle is oriented cranially. The ventral vertebral body creates an hourglass shape, with a constriction centrally. The vertebral body is inclined cranially in relation to the entire vertebra. The ventral extension of the cranial bulge is less prominent and elongated than the more proximal cervical vertebrae. Unlike the other vertebrae, the ventral ridge is strong cranially and is completely absent on the caudal half of the ventral  vertebral body. The ventral ridge is separated into two ridges with a median longitudinal groove, unique to all known ruminants. C7 ( figure 5). In dorsal view, the spinous process presents as a longitudinal bony thickening comprising the majority of the length of the dorsal lamina. The spinous process is shorter than that of a typical C7, and the surface is unique as it is smooth without bony protrusions or prominent striations. In lateral view, the spinous process is rounded and shaped like a parabola and is oriented dorsally. The caudal aspect of the dorsal lamina forms a widened V-shaped notch between the protruding caudal articular facets. The dorsal lamina is smooth, with faint/absent laminar ridges. The cranial articular facet is elongated and tubular, and curves medially. There is a ridge directly connecting the cranial articular facet to the transverse process. The dorsal tubercle presents as a small thickening on the caudal aspect of the transverse process, which is horizontal and very prominent. The transverse process is long and wide and is directed caudally. The vertebral body is oblong in relation to the dorsal lamina. The ventral vertebral body is boxy-shaped, but with the caudal end more laterally expanded and thickened than the rest of the vertebra. The ventral extension of the cranial bulge is expansive and rounded. Similar to C6, the ventral ridge is present and strong cranially and does not continue onto the caudal half of the ventral vertebral body. In place of the ventral ridge, there is a lateral bony expansion on the surface of the caudal vertebral body with several bony protrusions and thin elevated ridges.

Comparisons between Samotherium major and Okapia johnstoni/Giraffa camelopardalis
Statistical analysis of the cervical vertebrae demonstrates that the Samotherium vertebrae share characters with both extant taxa,and are overall slightly closer to G. camelopardalis. Measurements used to compare the three taxa are represented in tables 1-6. Analysis of the more cranial (C2-C3) vertebrae demonstrates that Samotherium shares individual characters with either G. camelopardalis or O. johnstoni, and the more caudal (C5-C7) vertebrae appear intermediate between G. camelopardalis and O. johnstoni (table 7). The Samotherium length-to-width ratios plot between the two taxa, and appear closer to O. johnstoni ( figure 6a). Samotherium also appears intermediate in several ratios, including anterior width : width, length : height of spinous process, cranial articular process and cranial articular facet (figure 6).

Morphological similarities between Samotherium major and Giraffa camelopardalis
Atlas. The cranial margin of the ventral arch is U-shaped, unlike G. camelopardalis where this edge is narrow and V-shaped (figure 7

Axis.
The ventral ridge is prominent, whereas it is faint and discontinuous in G. camelopardalis (figure 7).
C3. The thickest portion of the spinous process is positioned cranially, and it is caudal in G. camelopardalis. The caudal articular facets are circular and expansive, whereas they are more confined in G. camelopardalis. The pars interarticularis forms a well-defined separation between the dorsal lamina and the vertebral body, whereas this structure is faint in G. camelopardalis (figure 8). The caudal margin of the ventral vertebral body is laterally notched, unlike G. camelopardalis, where this region forms a transverse edge. There is a prominent ventral ridge on the ventral vertebral body, which is virtually absent in G. camelopardalis ( figure 7).
C5. The spinous process is oriented and positioned more cranially, and it is central/caudal in G. camelopardalis. The caudal articular facets are expansive and rounded, whereas they are confined in G. camelopardalis. The transverse process protrudes laterally, unlike G. camelopardalis where it presents as an elongated ridge. The ventral tubercle is oriented cranially and is oriented ventrally in G. camelopardalis (figure 8). The caudal margin of the ventral vertebral body is laterally notched, unlike G. camelopardalis, where this region forms a transverse edge. The ventral ridge is prominent and expands laterally at the caudal margin of the ventral vertebral body, whereas it is absent in G. camelopardalis (figure 7).
C6. The spinous process is thickest cranially, unlike G. camelopardalis where the thickness is central. The spinous process is dorsally inclined, and it is cranially inclined in G. camelopardalis.
C7. The tip of the spinous process is rounded, whereas the tip is flat in G. camelopardalis. The transverse process is horizontally oriented, and it is inclined caudally in G. camelopardalis. There is no intertubercular plate, unlike G. camelopardalis, where this structure is present. The ventral extension is large and rounded, whereas it is pointed in G. camelopardalis. The ventral tubercle is absent, unlike G. camelopardalis, where the structure is present. There is a broad, central ventral ridge, which expands on the caudal half of

Discussion
Cervical vertebral specimens are uncommon in fossil collections, both of giraffids and in general. Skulls and teeth have been historically favoured by many collectors and excavators [12]. The occurrence of an  almost complete neck of an extinct giraffid is therefore exceptional, and allows for a comprehensive morphologic analysis. Moreover, the presently described specimens are relatively undistorted, and mainly intact. While isolated cervical vertebrae have been found at Pikermi, Thessaloniki, Sinap, Maragheh and Shanxi, this study demonstrates the first relatively complete neck specimen. Previous studies have focused on the cervicals of extinct giraffids, and used the individual vertebrae to discuss the evolution of neck elongation [1,8]. While single vertebrae are useful, and provide details about the anatomy, the entire cervical column in its complexity demonstrates morphological patterns and serial characteristics which are necessary to understand the dimensions and anatomy of extinct giraffid necks. The giraffe neck is a favourable topic to science, as it exemplifies evolution with its specialized morphology. Giraffidae is an ideal family to examine cervical vertebrae. The two extant members represent short-and long-necked ruminants, and now the extinct S. major demonstrates an intermediate  neck, thus representing a range of cervical lengths and presumably adaptations. Initially, Solounias [13] proposed that G. camelopardalis possesses an extra vertebra (totalling eight cervical) based on similarities of the typical ruminant C7 to the T1 of G. camelopardalis [13]. However, it is more likely that the similarities between the giraffe T1 and typical C7 are due to morphological transposition [14], as the phylogenetic constraints in mammals commonly prevent changes in the number of vertebrae [15]. Comparisons between the cervical columns of the two extant giraffid species reveal interesting differences in the serial morphologic patterns, where G. camelopardalis exhibits more homogenized vertebrae [2].
In observing features of extant artiodactyl cervical vertebrae, we find several characters that give insight into the verticality of the neck: the position of the dorsal tubercle of the atlas, the length of the C7 spinous process and the position of the median indentation of the palatine bone. Overall, in artiodactyls, there are three general positions of the neck at resting position. (i) The neck is relatively horizontal at resting position, where the atlas is approximately at the same level as C7, although the total neck is curved. This is exemplified by Bos taurus and Syncerus caffer [16]. (ii) The neck is semi-vertical, with the cervical vertebrae inclined at about 45 • at resting position. This is the most common neck orientation in artiodactyls, represented by O. johnstoni and Gazella spp. [17]. (iii) The neck is relatively vertical, and the cervical vertebrae are inclined greater than 60 • at resting position. Giraffa camelopardalis, Camelus spp. and Litocranius walleri exemplify this neck orientation [17,18].
We find that S. major exhibits cervical vertebral characters that more closely resemble those of the artiodactyls with the relatively vertical neck orientation. These taxa possess a centrally positioned dorsal tubercle of the atlas. Owing to rotation of the neck to achieve a more vertical position, the dorsal tubercle presumably becomes caudally displaced on the atlas. In S. major, the C1 dorsal tubercle is centrally positioned on the dorsal arch. Moreover, species exhibiting vertical necks often possess short C7 spinous processes relative to the vertebral body, as seen in G. camelopardalis, Camelus spp. and Litocranius walleri [2,17,18]. We believe this relates to the fibres of the laminar portion of the nuchal ligament attaching from T1 to C7. As expected, in S. major the spinous process of C7 is short (table 3) of the soft palate relates to the orientation of the pharynx and larynx [9]. The epiglottis of the larynx forms a seal with the soft palate; therefore, their positions are closely interrelated. In a vertical neck, the vertebrae are oriented closer to the pharynx and larynx, which are consequently displaced anteriorly [9]. This displacement is reflected by a rostrally positioned palatine indentation. It is possible that S. major had a more vertical neck orientation than the giraffe. In S. major, the palatine indentation is between M2 and M3, which is more extreme than in G. camelopardalis, where the indentation is at the protocone of M3 [9]. We hypothesize that these characters are osteological correlates for the verticality of the neck, and that S. major possessed relatively vertically oriented cervical vertebrae at resting position.
Samotherium major exhibits cervical vertebral features that are uncharacteristic of ruminants. The S. major cervicals, in lateral view, have a 'wedged' morphology, where the caudal end of the vertebra has more depth, and the cranial end is smaller. This is atypical of ruminants; normally, the vertebral body and pedicles are of relatively equal size throughout the length. Several muscles that originate in the thorax insert on the caudal aspect of the cervical vertebrae [19], which is more extensive in S. major. We believe this matches the verticality osteological features, and that the presumed verticality of this extinct giraffid was strongly reinforced by muscular connections between the thorax and neck.
Samotherium major exhibits several unique morphologic features that are absent in the G. camelopardalis and O. johnstoni cervical vertebrae. In S. major, the cranial-most aspect of the spinous process of C2 is positioned caudally to the dens, whereas in G. camelopardalis and O. johnstoni it reaches the level of the dens. This increases the space between the atlas and axis, and would allow for increased dorsally directed motion of the atlas and the head. Samotherium major also has an atypical skull feature, where the occipital bone protrudes caudal to the skull (figure 8). We believe these two features are interrelated. Moreover, the dorsal lamina of S. major cervicals has a fossa, lateral to the spinous process. Ridges formed from the attachment of the multifidus muscle create this concavity. While S. major shares many features with the two extant giraffids, this extinct taxon also demonstrates characteristics atypical of giraffids, and ruminants in general.
The measured dimensions and observed morphological features of the S. major proximal vertebrae (C2-C3) demonstrate a mosaic of both G. camelopardalis and O. johnstoni qualities. The majority of measurements of these S. major vertebrae are statistically more similar to either G. camelopardalis or O. johnstoni (table 7). For example, the angle of the dorsal tubercle is most similar between S. major and O. johnstoni, whereas the angle of the spinous process of S. major more closely resembles G. camelopardalis (table 7). Similarly, the morphology of C2-C3 supports this observation that these vertebrae exhibit traits shared either with G. camelopardalis or with O. johnstoni. The cranial articular processes are more similar in shape to G. camelopardalis, and the caudal articular facets better match with O. johnstoni. It appears that the serial homology from one vertebra to another is complex, and individual morphological characters and measurements act independently within the same vertebra.
Features of the S. major distal (C5-C7) cervical vertebrae indicate a transitional state between the cervicals of G. camelopardalis and O. johnstoni. Measurements of these S. major vertebrae show few statistically significant differences with G. camelopardalis or O. johnstoni, indicating that the dimensions are between those of the two extant taxa. Morphologically, the C6 of S. major is exceptionally unique, and this vertebra exhibits several features intermediate between G. camelopardalis and O. johnstoni. Notably, in S. major, the ventral ridge is strong cranially and is absent caudally. In G. camelopardalis the ventral ridge is absent, and in O. johnstoni the ridge is fully developed and continuous on the ventral vertebral body. Additionally, the cranial opening of the C6 foramen transversarium in S. major is located between the cranial position seen in O. johnstoni and the more caudal position seen in G. camelopardalis. Lastly, the C6 of S. major possesses a ventral laminar wall with a notch visible in lateral view. In O. johnstoni the typical ventral lamina of ruminants is present, whereas in G. camelopardalis this lamina is completely excavated [2]. The notch seen in S. major represents a partial excavation of the ventral lamina, a feature intermediate between the two extant giraffids.
The cervical vertebrae of S. major have been previously referred to as 'intermediate', however this terminology in neck evolution can have several meanings. Length measurements of the Samotherium vertebrae indicate that the neck of this taxon is intermediate between that of short-and long-necked ungulates [1]. Similarly, the limb and neck measurements of Samotherium have been described to exhibit 'giraffe-like' lengthening, but do not yet reach the dimensions of G. camelopardalis [20]. Solounias [9] considered the Samotherium neck to be intermediate within Giraffidae based on cervical lengths and anatomical features [9]. A recent study of the evolutionary elongation of the giraffe neck found two significant lengthening stages within the family: cranial vertebral and caudal vertebral elongation. Samotherium is intermediate in the evolutionary process, as it demonstrates cranial lengthening, but