New information on the Cretaceous sauropod dinosaurs of Zhejiang Province, China: impact on Laurasian titanosauriform phylogeny and biogeography

Titanosaurs were a globally distributed clade of Cretaceous sauropods. Historically regarded as a primarily Gondwanan radiation, there is a growing number of Eurasian taxa, with several putative titanosaurs contemporaneous with, or even pre-dating, the oldest known Southern Hemisphere remains. The early Late Cretaceous Jinhua Formation, in Zhejiang Province, China, has yielded two putative titanosaurs, Jiangshanosaurus lixianensis and Dongyangosaurus sinensis. Here, we provide a detailed re-description and diagnosis of Jiangshanosaurus, as well as new anatomical information on Dongyangosaurus. Previously, a ‘derived’ titanosaurian placement for Jiangshanosaurus was primarily based on the presence of procoelous anterior caudal centra. We show that this taxon had amphicoelous anterior-middle caudal centra. Its only titanosaurian synapomorphy is that the dorsal margins of the scapula and coracoid are approximately level with one another. Dongyangosaurus can clearly be differentiated from Jiangshanosaurus, and displays features that indicate a closer relationship to the titanosaur radiation. Revised scores for both taxa are incorporated into an expanded phylogenetic data matrix, comprising 124 taxa scored for 548 characters. Under equal weights parsimony, Jiangshanosaurus is recovered as a member of the non-titanosaurian East Asian somphospondylan clade Euhelopodidae, and Dongyangosaurus lies just outside of Titanosauria. However, when extended implied weighting is applied, both taxa are placed within Titanosauria. Most other ‘middle’ Cretaceous East Asian sauropods are probably non-titanosaurian somphospondylans, but at least Xianshanosaurus appears to belong to the titanosaur radiation. Our analyses also recover the Early Cretaceous European sauropod Normanniasaurus genceyi as a ‘derived’ titanosaur, clustering with Gondwanan taxa. These results provide further support for a widespread diversification of titanosaurs by at least the Early Cretaceous.

PDM, 0000-0002-9361-6941; WZ, 0000-0002-3610-806X Titanosaurs were a globally distributed clade of Cretaceous sauropods. Historically regarded as a primarily Gondwanan radiation, there is a growing number of Eurasian taxa, with several putative titanosaurs contemporaneous with, or even predating, the oldest known Southern Hemisphere remains. The early Late Cretaceous Jinhua Formation, in Zhejiang Province, China, has yielded two putative titanosaurs, Jiangshanosaurus lixianensis and Dongyangosaurus sinensis. Here, we provide a detailed re-description and diagnosis of Jiangshanosaurus, as well as new anatomical information on Dongyangosaurus. Previously, a 'derived' titanosaurian placement for Jiangshanosaurus was primarily based on the presence of procoelous anterior caudal centra. We show that this taxon had amphicoelous anteriormiddle caudal centra. Its only titanosaurian synapomorphy is that the dorsal margins of the scapula and coracoid are approximately level with one another. Dongyangosaurus can clearly be differentiated from Jiangshanosaurus, and displays features that indicate a closer relationship to the titanosaur radiation. Revised scores for both taxa are incorporated into an expanded phylogenetic data matrix, comprising 124 taxa scored for 548 characters. Under equal weights parsimony, Jiangshanosaurus is recovered as a member of the nontitanosaurian East Asian somphospondylan clade Euhelopodidae, and Dongyangosaurus lies just outside of Titanosauria. However, when extended implied weighting is first to include Jiangshanosaurus in a phylogenetic analysis, in which it was recovered as a saltasaurid, in a sister taxon relationship with Alamosaurus. Averianov & Sues [51] subsequently argued that Jiangshanosaurus is unlikely to be a saltasaurid based on the absence of strong procoely in the figured caudal vertebrae [60, pl. 2], contrasting with the original written description. Consequently, Averianov & Sues [51] suggested that Jiangshanosaurus more probably represents a non-lithostrotian titanosaur. This latter placement was recovered in analyses by Sallam et al. [66], using an independent phylogenetic data matrix.
A second postcranial skeleton of a sauropod was discovered in Zhejiang Province in 2007, this time from the centre of the province, in Dongyang City [62]. Based on an articulated vertebral sequence spanning most of the dorsal column through to the second caudal vertebra, as well as the pelvis, Lü et al. [61] described it the following year as a new taxon, Dongyangosaurus sinensis. These authors stated that it came from the early Late Cretaceous Fangyan Formation, but subsequent studies have shown that this unit is actually the Jinhua Formation ( [63,67] and references therein). Lü et al. [61] considered Dongyangosaurus to be a 'basal' titanosaur, given that it lacks procoelous caudal vertebrae. Whereas D'Emic [40] optimized Dongyangosaurus as a euhelopodid somphospondylan, other authors have regarded it as a titanosaur, although its position is unstable. Mannion et al. [41] incorporated it into a phylogenetic analysis, in which it was recovered as a saltasaurid with a close relationship to Opisthocoelicaudia skarzynskii, from the Maastrichtian of Mongolia [68]. Based on the absence of caudal vertebral procoely, Averianov & Sues [51] questioned this placement and argued for a nonlithostrotian titanosaur placement, although it should be noted that Opisthocoelicaudia also lacks procoelous caudal vertebrae. However, subsequent iterations of the Mannion et al. [41] matrix have supported a 'basal' titanosaurian placement [69][70][71].
Here, we provide a detailed re-description of Jiangshanosaurus lixianensis, as well as new anatomical information on Dongyangosaurus sinensis, based on first-hand study. We use these amended data to reexamine the phylogenetic position of both taxa, evaluating whether or not they represent derived titanosaurs with close affinities to latest Cretaceous taxa. Finally, we present a new synthesis of the evolution and biogeographic history of Laurasian somphospondylans.  Revised diagnosis: Jiangshanosaurus lixianensis can be diagnosed by two autapomorphies (marked with an asterisk), as well as five local autapomorphies: (i) spinodiapophyseal laminae absent in posterior dorsal vertebrae; (ii) centroprezygapophyseal fossa (CPRF) in anteriormost caudal vertebrae; (iii) ventral ends of spinoprezygapophyseal laminae situated medial to (rather than contacting) prezygapophyses in anterior-middle caudal vertebral transition*; (iv) dorsal margins of scapula and coracoid almost level, with no V-shaped gap; (v) coracoid glenoid does not curl upwards to expose the glenoid surface in lateral view; ( fig. 8; pl. 2, figs 5, 7], who interpreted this as Dv 7. The three most posterior dorsal vertebrae were articulated at the time of discovery and were interpreted as Dv 9-11, but the anteriormost of these vertebrae was subsequently separated [60, pl. 1, figs 9-11]. Dv 9 preserves the centrum and lower neural arch. Dv 10 and 11 are relatively complete vertebrae (figure 1); however, preservation is poor in some places, especially along the neural spines and the posterior surface of Dv 11. Both vertebrae have also undergone a small amount of transverse compression, with the diapophyses crushed. Furthermore, the vertebrae are not fully prepared, meaning that their left surfaces cannot be observed. The approximate position of the remaining dorsal vertebra is unclear, but for simplicity we refer to it as Dv 8. Dv 7-9 are now incorporated into the mounted skeleton, and are fully restored, thereby greatly limiting their accessibility and anatomical utility. As such, most of our description is based on the two remaining articulated dorsal vertebrae that were originally identified as Dv 10 and 11.
All centra have a prominent anterior convexity that forms a sharp rim, separating the condyle from the remainder of the centrum (figure 1a). Each centrum is dorsoventrally taller than its transverse width (table 1). There are no ridges or fossae on the ventral surfaces, which are convex transversely. The lateral surfaces of the dorsal centra are excavated by a pneumatic opening that is set within a shallow fossa, as is the case in most somphospondylans [2]. These openings are biased towards the anterodorsal corner of the centrum. Although partially filled with matrix, these lateral pneumatic openings do not seem to ramify particularly deeply. There is evidence for a subhorizontal ridge inside at least some of these openings. Parapophyses are clearly absent from all five preserved centra, supporting the interpretation that these are not anterior dorsal vertebrae.
The anterior neural canal opening is set within a CPRF (figure 1b), as is the case in most eusauropods, with the exception of some titanosaurs, e.g. Alamosaurus and Saltasaurus [69,72]. Centroprezygapophyseal laminae (CPRLs) are non-bifid. Prezygapophyseal articular surfaces are largely flat and are tilted at least 30°to the horizontal. A steeply tilted zygapophyseal table is characteristic of the posterior dorsal vertebrae of titanosaurs, including putative forms such as Baotianmansaurus and Ruyangosaurus [69,72]. There is no hypantrum, which suggests that a hyposphene was probably absent, at least in posterior dorsal vertebrae, as is the case in most somphospondylans [1].
Although the parapophysis is not preserved on any vertebra, its position can be estimated based on the orientation of several parapophyseal laminae: it was probably situated at a similar height as the prezygapophyses in Dv 10 and 11, and possibly ventral to the diapophysis in Dv 11. The anterior centroparapophyseal lamina (ACPL) extends steeply anteroventrally to merge with the CPRL ventrally, although no prominent fossa is formed between these two laminae. Two posterior centroparapophyseal laminae (PCPLs) are present (figure 1a). The upper PCPL is a prominent lamina that is oriented steeply anterodorsally and presumably merges with the ACPL dorsally. By contrast, the lower PCPL is a much less well-developed ridge that is not as steeply oriented, and merges with the lower half of the ACPL. There is a shallow fossa on the lateral surface of the arch, anteroventral to the upper PCPL, as well as a more prominent fossa in between the two PCPLs, with the ACPL forming the anterodorsal margin of this excavation. Both the posterior centrodiapophyseal lamina (PCDL) and paradiapophyseal lamina (PPDL) are subvertical (figure 1a), and demarcate a prominent, dorsoventrally elongate fossa. The PCDL does not notably widen or bifurcate at its ventral end. A poorly preserved prezygoparapophyseal lamina (PRPL) and prezygodiapophyseal lamina (PRDL) are discernible on Dv 11 (figure 1a). The diapophysis clearly projects strongly dorsolaterally, and a postzygodiapophyseal lamina (PODL) is still present, at least on Dv 10. A fossa is present between the PRPL, PPDL and the prominent spinoprezygapophyseal lamina (SPRL).
The neural spine projects mainly dorsally, with a slight posterior deflection. Although slightly incomplete, the neural spine is dorsoventrally short. In lateral view, the anteroposterior length of the neural spine appears to be consistent along its vertical extent. Although we cannot determine if there was any subtle bifurcation of the neural spine, there is clearly no deep division into separate metapophyses. A distinct, rugose prespinal lamina (PRSL) extends along the midline of the anterior surface of the neural spine (figure 1b), as is the case in most somphospondylans [41]. SPRLs are restricted to the anterolateral margins of the neural spine. In this regard, Jiangshanosaurus differs from many titanosaurs (e.g. Alamosaurus and Opisthocoelicaudia), in which the SPRLs are short and merge into the PRSL near to the base of the neural spine [69,72]. In contrast to the posterior dorsal vertebrae of nearly all other eusauropods [26], there is no evidence for spinodiapophyseal laminae ( figure 1a). As such, we regard their absence as an autapomorphic reversal in Jiangshanosaurus. Weakly developed aliform processes project laterally near the neural spine apex. Little can be ascertained of the  ; see table 1 for measurements). Tang et al. [60] interpreted this as the first caudal vertebra. Although we agree that it is from the proximal end of the tail, it is unlikely to be Cd1, based on the presence of chevron facets, which are usually absent from the first few caudal vertebrae [2]. The internal tissue structure of the vertebra is fine and spongey, as is also the case in the more distally preserved caudal vertebrae. This absence of camellae contrasts with the pneumatized anteriormost caudal vertebrae of several lithostrotian titanosaurs [26,41]. The centrum is anteroposteriorly short compared with its height and width, with an average elongation index (aEI) of 0.41. This value is lower than that of most other sauropods, which typically have values closer to 0.6 [2], and even reaching 0.92 in Alamosaurus [41]. However, the low aEI value of Jiangshanosaurus is similar to that of the East Asian somphospondylans Baotianmansaurus (0.45), Opisthocoelicaudia (0.46) and Tangvayosaurus (0.35) [41]. The centrum is slightly mediolaterally wider than dorsoventrally tall. Its ventral surface is flat to very mildly concave transversely, and lacks clearly defined ventrolateral ridges. Posterior chevron facets are present, but are poorly preserved. They are widely separated from one another, indicating that proximal chevrons were unlikely to have been dorsally bridged. The lateral surface of the centrum is anteroposteriorly concave and dorsoventrally convex, and lacks fossae, foramina and ridges.
The anterior articular surface of the centrum is concave, with a weakly developed, small central bump, and the posterior articular surface is consistently concave. Tang et al. [60] described the centrum as procoelous, which has led many subsequent authors to assume that there is a posterior convexity (e.g. [2,41]). However, the 'true' definition of procoely solely describes the concave nature of the anterior surface of the centrum [73], although the term has regularly been used to describe sauropod caudal centra that have a convex posterior articular surface (e.g. [1, 23,74]). Regardless of the royalsocietypublishing.org/journal/rsos R. Soc. open sci. 6: 191057 usage of procoely intended by Tang et al. [60], we can unambiguously state that the preserved caudal centra of Jiangshanosaurus lack a posterior convexity. As such, the amphicoelous anterior caudal centra of Jiangshanosaurus contrast with those of nearly all titanosaurs [1], with the exception of Savannasaurus [69] and some putative titanosaurs (i.e. Baotianmansaurus and Dongyangosaurus [41]).
The caudal rib extends from the upper third of the centrum and onto the neural arch, and projects laterally. Although the ventral margin of the caudal rib is deflected dorsolaterally, only the base is preserved and so we cannot determine whether this orientation was maintained distally. The dorsal margin of the caudal rib faces dorsolaterally, lacking the 'fan'-shape that characterizes many diplodocoids [49,75]. Neither the anterior nor posterior surfaces of the caudal rib are excavated. A short, distinct anterior centrodiapophyseal lamina (ACDL) supports the caudal rib, and there is a PCDL too. These diapophyseal laminae are absent from the caudal vertebrae of most nondiplodocoids [26,49], although an ACDL is also present in a small number of brachiosaurids, as well as the basal somphospondylans Phuwiangosaurus and Tastavinsaurus [76]. It is not possible to determine whether a distinct PRDL is present because of preservation, but a PODL is definitely absent. Although incompletely preserved on both sides, a tubercle is situated on the dorsal surface of the caudal rib, close to the base of the prezygapophysis. A comparable tubercle is present on the anteriormost caudal vertebrae of a wide array of eusauropods [69], including numerous somphospondylan taxa [31].
The neural canal is wider than tall. Each prezygapophysis is supported ventrally by a thick, vertical CPRL. In anterior view, the interprezygapophyseal lamina (TPRL) is V-shaped, with the ventral tip of this 'V' meeting the roof of the anterior neural canal opening. The CPRL and TPRL form a subtriangular CPRF on the anterior surface of the neural arch. A CPRF is present in the anteriormost caudal vertebrae of several diplodocoids, but otherwise seems to be restricted to a small number of derived titanosaurs, e.g. Saltasaurus [71]. We therefore consider this feature to be a local autapomorphy of Jiangshanosaurus. The prezygapophyses project strongly dorsally, such that they do not extend beyond the anterior margin of the centrum, and their flat articular surfaces face dorsomedially. The posterior surface of the neural arch is poorly preserved and it is not possible to determine whether or not a hyposphene was present.  (see table 1 for measurements), although the left side of the centrum has been worn away, the left prezygapophysis is incomplete, and the right prezygapophysis has been distorted and displaced (figure 3a-e). The centrum is transversely compressed. It has a shallow midline ventral concavity, but no distinct ventrolateral ridges. The anterior articular surface of the centrum is irregular: overall, it is concave, with a small central bulge, but it forms a convexity along its dorsal third. By contrast, the posterior articular surface of the centrum is consistently concave. There are no openings or ridges on the lateral surface of the centrum, although there is a prominent bulge-like process on the archcentrum junction. The caudal rib is incomplete (and only preserved on the right side), but is clearly reduced.

Distal anterior caudal vertebra
The neural arch is situated on the anterior two-thirds of the centrum. The neural canal is elliptical and taller than wide. Despite their distortion, the prezygapophyses clearly did not project far beyond the anterior margin of the centrum. The SPRLs extend down to the base of the prespinal fossa, such that they do not truly contact the prezygapophyses; this morphology is regarded as an autapomorphy of Jiangshanosaurus. Dorsally, the SPRLs fade out at about spine midheight and are restricted to the anterolateral margin of the neural spine. A ridge extends between the prezygapophysis and postzygapophysis at the base of the lateral surface of the neural spine, forming the floor of a shallow spinodiapophyseal fossa (SDF). A similar ridge is seen in the anterior-middle caudal transitional region of several brachiosaurids, as well as the somphospondylans Andesaurus and Huabeisaurus [31,77]. The postzygapophyses are large processes that border a prominent postspinal fossa at the base of the neural spine. Their articular surfaces are flat to very mildly convex, and face posteroventrally, as well as medially. The neural spine projects posterodorsally, extending to approximately midlength of the proceeding caudal vertebra, although its anterodorsal margin does not extend further posteriorly than the postzygapophyses. It is a transversely thin structure, although it thickens slightly dorsally, and its dorsal surface is convex both transversely and anteroposteriorly. There is no distinct prespinal ridge, and no clear evidence for a postspinal ridge.

Proximal middle caudal vertebra
A vertebra from the proximal region of the middle caudal vertebral series (figured in [60, pl. II, figs 9-11]) preserves the centrum and base of the arch, although the portion of prezygapophysis shown in the original images is no longer present (figure 3f-k). The centrum is slightly taller than wide (table 1). There are no ventrolateral ridges, and the ventral surface is only very mildly concave transversely. Posterior chevron facets are present and are well separated along the midline.
The anterior articular surface of the centrum is similar to that of the preceding caudal vertebra, being gently concave ventrally and convex along its dorsal third, whereas the posterior articular surface is more deeply concave. This condition, whereby the posterior articular surface is more deeply concave than the anterior surface, characterizes the anterior-middle caudal centra of several other mid-Late Cretaceous East Asian somphospondylans (Gobititan, Huabeisaurus, 'Huanghetitan' ruyangensis, Phuwiangosaurus, Tambatitanis, Tangvayosaurus), as well as the Australian titanosaur Savannasaurus [31,50,69]. The caudal rib is reduced such that it is now just a ridge a short distance below the dorsal margin of the centrum. There are no other ridges or fossae on the lateral surface of the centrum, although there is still a bulge on the arch-centrum junction.
The neural arch is anteriorly biased, and the prezygapophyses project anterodorsally. The autapomorphic SPRL morphology described in the preceding vertebra is again present, with the ventral ends of the SPRLs situated medial to the prezygapophyses. In addition, the ridge linking the prezygapophysis with the postzygapophysis is still present, forming a subtle shelf to a barely perceptible SDF. Postzygapophyses are still very prominent structures that form a moderately deep postspinal fossa at the base of the spine, and they extend beyond the posterior margin of the centrum. The postzygapophyseal articular surfaces are mildly convex. Based on its preserved base, the neural spine would have projected posterodorsally at approximately 45°to the horizontal.

Scapulocoracoid
The scapulocoracoid is here described with the long axis of the scapular blade oriented horizontally (figure 4a,b; see  scapula is largely complete [60]. Although the coracoid was originally described as complete by Tang et al. [60], its anterior margin is poorly preserved and it is likely that some material is missing, especially at the anteroventral corner. This would also explain why it appears to be unusually short anteroposteriorly. Much of the medial surface of the scapulocoracoid is also coated with plaster. It is not possible to observe the internal tissue structure. The scapula-coracoid articular surface is approximately 90°to the long axis of the blade. The dorsal margins of the scapula and coracoid are roughly level with one another, with only a shallow concavity, rather than a V-shaped notch, between them. This morphology is otherwise known only in titanosaurs [75], and is therefore regarded as a local autapomorphy of Jiangshanosaurus. As in all somphospondylans [74], the scapular glenoid is bevelled medially. The scapula also has a greater contribution to the glenoid than the coracoid. The region immediately posterior to the scapular glenoid forms a distinct ridge where the lateral surface meets the posteromedial surface of the acromion. This lateral ridge is not continuous with the ventral margin of the scapular blade. Instead, the ventral blade margin extends medial to the lateral ridge and fades out into the posteromedially facing flattened area that lies medial to the lateral ridge. Dorsally, the lateral ridge fades out into the posterolateral surface of the acromion, at approximately the level of the acromial ridge. Anterior to the acromial ridge, the lateral surface of the acromion is fairly flat and featureless. The anteroposteriorly thick, low acromial ridge is subvertical (with a slight anterior deflection) relative to the long axis of the scapular blade, and there is no excavation of the lateral surface posterior to this ridge. The posterior margin of the dorsal third of the acromion is straight and slopes to face posterodorsally. There is no evidence for ventral tubercles on either the acromion or proximal part of the blade. The lateral surface of the scapular blade is dorsoventrally convex, forming a low, rounded ridge that extends posteroventrally along much of the length of the scapula. By contrast, the medial surface is fairly flat and there is no clear evidence for tubercles or ridges on this surface of the blade, but there is too much plaster to be entirely certain. The base of the scapular blade therefore has a D-shaped cross section. This morphology characterizes the scapulae of most eusauropods, whereas this cross section is rectangular in many somphospondylans, including Alamosaurus [26]. The scapular blade of Jiangshanosaurus clearly expands dorsoventrally at its incomplete distal end. The coracoid has a rounded anterodorsal corner in lateral view, but this might not be genuine because it is potentially incomplete. It is not possible to detect the position of the coracoid foramen, presumably because it has been filled with plaster. The coracoid glenoid does not expand laterally or curl upwards to expose the glenoid surface in lateral view. In this regard, the coracoid of Jiangshanosaurus is comparable to those of many non-neosauropods, as well as several derived titanosaurs [69], and is therefore regarded as a local autapomorphy. There is a concave notch-like area on the ventral margin of the coracoid, immediately anterior to the glenoid. The lateral surface lacks any distinct tubercles, but preservation is poor in places, meaning that we cannot be certain of their absence.

Pubis
Both pubes are preserved and incorporated into the mounted skeleton (figure 4c; see table 2 for measurements). Each element is incomplete proximally, and a large amount of material is missing from their posterior margins [60, pl. I, figs [2][3][4][5]. There is a low rounded ridge on the lateral surface of the middle third of both pubes. This ridge extends posteroventrally from a point close to the anterior margin. Unlike several titanosaurs [10,69,78], there is no groove anterior to this ridge. The distal ends of the pubes are slightly expanded anteroposteriorly relative to the main shaft, but there is no pubic 'boot'. There is also no notable transverse expansion of the distal end, resulting in a laminar blade that is comparable to those in most somphospondylans [3,69].

Ischium
Both ischia are also preserved and incorporated into the mounted skeleton (figure 4d; see table 2 for measurements). They are incomplete proximally and missing some of their margins [60, pl. 1, figs 6,7]. Based on its preserved lower portion, the iliac peduncle is approximately twice as long anteroposteriorly as it is wide, but there is unlikely to have been a large ischial contribution to the acetabulum. There is a sharp ridge for attachment of M. flexor tibialis internus III on the dorsolateral margin of the proximal end of the shaft, defining the lateral margin of a broad and deep longitudinal groove. The ridge shows some signs of damage, which means that it might have been larger and more bulbous, and the associated groove less prominent. Nevertheless, the presence of a groove contrasts with the ischia of nearly all titanosauriforms [40,69], and is herein regarded as an autapomorphic reversal characterizing Jiangshanosaurus. The ridge projects mainly laterally, and would not have extended above the level of the main shaft, in contrast to the ischia of the somphospondylans Huabeisaurus [31] and Wintonotitan [79].
Poor preservation means that it is not possible to determine the nature of the upper symphysis of the paired ischia. The distal shafts of the paired ischia would have been closer to the coplanar condition when articulated, as is the case in most macronarians and rebbachisaurids [74,75]. These distal ends show little in the way of expansion relative to the rest of the shaft, with the exception of an autapomorphic small hook-like dorsolateral process. They have rugose terminal surfaces that are at least five times as wide transversely as dorsoventrally.

Femur
Only a portion of the shaft of the left femur is preserved, which is incorporated into the mounted skeleton. It has a transversely elongate, elliptical cross section, with its mediolateral width more than double that of its anteroposterior diameter (table 2). The anterior surface lacks the midline ridge (linea intermuscularis cranialis) that characterizes some derived titanosaurs [40,78]. A low, rounded fourth trochanter is present on the medial margin of the posterior surface, and is not visible in anterior view. However, this region is heavily plastered, and the fourth trochanter might be entirely reconstructed, as implied by Tang

Additional anatomical information on Dongyangosaurus sinensis
Brief and limited access was granted to P.D.M. to study the type specimen of Dongyangosaurus sinensis (DYM 04888). Despite these restrictions, this still enabled an improved and revised understanding of the anatomy of Dongyangosaurus compared to that provided by Lü et al. [61]. Here, we present a brief update to Lü et al. [61].
Dorsal vertebrae are camellate, and comparable to most somphospondylans [74]. The ventral surfaces of the dorsal centra lack ridges or excavations, differing from the morphology of Opisthocoelicaudia [68] and Diamantinasaurus [80]. Each CPRL consists of two parallel laminae, at least in posterior dorsal vertebrae. Outside of Diplodocoidea, this morphology is uncommon [23], although a bifid CPRL characterizes the middle-posterior dorsal vertebrae of Huabeisaurus [31] and Saltasaurus [71]. PCPLs also comprise two parallel laminae. A PODL is present throughout the dorsal series, contrasting with some derived titanosaurs (e.g. Alamosaurus, Opisthocoelicaudia), in which the PODL disappears in more posterior dorsal vertebrae [1]. Dorsal neural spines project posterodorsally and all are bifid, although the depth of bifurcation decreases along the sequence. Bifid dorsal neural spines are characteristic of a wide array of eusauropods, including mamenchisaurids, turiasaurs, many diplodocoids, Camarasaurus, Daxiatitan and Opisthocoelicaudia [26,52,75]. SPRLs form the anterolateral margins of the neural spine metapophyses. A midline lamina extends dorsoventrally along the anterior surface of each metapophysis. An SPDL is present throughout the dorsal series. There is an anterior and posterior SPDL in posterior dorsal vertebrae, and it appears that the former is a 'captured' SPRL. Paired SPDLs also characterize several titanosaurs, including Baotianmansaurus, Epachthosaurus and Saltasaurus [69]. The posterior SPDL is not bifurcated. SPOLs are bifid, at least in posterior dorsal vertebrae. No additional anatomical information could be gleaned from the sacrum.
Both the anterior and posterior surfaces of the centra of caudal vertebrae 1 and 2 are gently concave. Neither centrum has a lateral or ventral excavation. The first caudal rib appears to have been crushed, such that the dorsal surface is visible in lateral view. As such, the 'anchor'-like morphology in Lü  fig. B] is the result of an anterolaterally curving rib, combined with a posterior expansion. The distal tip of the caudal rib appears to articulate with the ilium, although it is possible that this is the product of deformation. The posterior expansion of the rib is similar to the condition identified in the early-branching titanosaurs Andesaurus and Epachthosaurus [69,81].
The anterior two-thirds of the preacetabular process have been anteriorly displaced, giving the impression that the ilium is unusually anteroposteriorly long. Nevertheless, the ilium is an anteroposteriorly elongate, dorsoventrally low element. The preacetabulum is strongly flared laterally, but lacks a horizontal 'platform'. There is also no ventral 'kink' on the preacetabulum. The pubic peduncle has been displaced, and thus its orientation cannot be determined. There is no subtriangular fossa on its lateral surface, and the ischiadic peduncle lacks a lateral protuberance.
Only the left pubis is visible. The obturator foramen is fully ringed by bone and is elliptical, with its long axis approximately parallel to that of the pubic shaft. There is no ambiens process. The pubic shaft is strongly twisted relative to the proximal plate, although this has probably been accentuated by crushing. Regardless, it means that the lateral surface largely faces posteriorly, such that the view presented in Lü et al. [61, pl. 2, fig.  A] is essentially of the anterolateral margin of the shaft. As such, the shaft is not as anteroposteriorly narrow as it appears, and has a more 'standard' morphology. The original figure also gives the impression that the left pubis has a distal anterior boot; however, this is likely to be either a broken, distorted piece of this element, or is part of the right pubis. There is no ridge on the lateral surface of the shaft, contrasting with the condition in several titanosaurs, including Opisthocoelicaudia and Saltasaurus [10].
As is the case with the pubis, the view presented in Lü et al. [61, pl. 2, fig. A] does not actually show the ischium in lateral view; instead, it shows the dorsolateral margin, meaning that the distal shaft is not as narrow as it appears. The anterodorsal corner of the ischiadic plate seems to form an upturned area, with a concave acetabulum in lateral view, as is the case in most titanosaurs [40]. Although it is probably accentuated by crushing, there is a very prominent ridge for the attachment of M. flexor tibialis internus III, with no associated groove. The ischia are preserved in articulation, demonstrating that their distal ends are almost certainly coplanar; however, they have undergone crushing and deformation, with the distal extremities seemingly smeared out as flanges. As is also the case in titanosaurs [26,75], as well as Huabeisaurus [31], there is no emargination distal to the pubic articulation, on the ventral margin.

Phylogenetic analysis and results
We revised the existing scores of Jiangshanosaurus and Dongyangosaurus in the most recent version of the Mannion et al. [41] data matrix, which comprises 117 OTUs scored for 542 characters [71]. These existing scores were based solely on the original publications of Tang et al. [60] and Lü et al. [61]. Based on our first-hand observations of these two taxa, we revised 67 and 42 characters for Jiangshanosaurus and Dongyangosaurus, respectively. We also augmented our scores for the late Early Cretaceous Chinese somphospondylan Ruyangosaurus giganteus following the additional material described from the type locality by Lü et al. [82]. A small number of existing character scores were also revised for other somphospondylan taxa, including new information on the cranial anatomy of the 'basal' lithostrotian Malawisaurus dixeyi [83]. These changes are all summarized in appendix A. We also added seven somphospondylan taxa to our matrix: (i) the Early Cretaceous French sauropod Normanniasaurus genceyi was scored based on Le Loeuff et al. [46] and personal observations of the type material (MHNH-2013.  [85,86]; and (vii) Vahiny depereti, from the latest Cretaceous of Madagascar, was scored based on Curry Rogers & Wilson [87]. Six characters were also added (see appendix A): five new characters based on a review of the literature, and one modified from Santucci & Arruda-Campos [88]. The revised data matrix comprises 124 OTUs scored for 548 characters.
We followed the analytical protocol implemented in Mannion et al. [71]. Characters  . Using equal weighting of characters, this pruned data matrix was analysed using the 'Stabilize Consensus' option in the 'New Technology Search' in TNT v. 1.5 [89,90]. Searches employed sectorial searches, drift and tree fusing, with the consensus stabilized five times, prior to using the resultant trees as the starting topologies for a 'Traditional Search', using Tree Bisection-Reconstruction. We then re-ran the analysis, using the same pruned matrix and protocol, but also applying extended implied weighting in TNT [91,92]. This approach downweights characters with widespread homoplasy during the tree search, with a concavity (k) value used to define the strength of downweighting. The lower the k-value, the more strongly a highly homoplastic character is downweighted [91]. Previous analyses of this dataset have used a k-value of 3, which is the default value in TNT. However, this is quite a severe application of downweighting, and simulations indicate that a higher value might be more appropriate [92]; see also [93]. As such, here we ran two sets of extended implied weighting analysis, using a k-value of 3 and 9. The revised data matrix is provided as both a nexus and TNT file (electronic supplementary material).
Our equal weights parsimony (EWP) analysis resulted in 792 MPTs of length 2654 steps. The strict consensus is well-resolved (figure 5a), and the overall topology is similar to that in Mannion et al. [71], albeit with greater resolution within Titanosauria. Bremer supports have values of 1 or 2 for most nodes. Analysis using extended implied weights, with a k-value of 3 (EIW3), produced 2376 MPTs of length 242.6 steps. Although the rest of the topology (figure 5b) is similar to that presented in Mannion et al. [71], there are a number of differences within Somphospondyli, as well as a large polytomy at the base of this clade. The Pruned Trees and Agreement subtree options in TNT show that this polytomy can be resolved by excluding two (Padillasaurus and Sauroposeidon) out of the 12 OTUs (note that Sauroposeidon is probably the senior synonym of Paluxysaurus [94], which is retained as a separate OTU in this resolved polytomy). When a k-value of 9 was used (EIW9), our analysis resulted in 5940 MPTs of length 137.9 steps. Overall, this topology (figure 5c) is closer to that of EIW3 than EWP, but there are a number of differences. As with the aforementioned analysis, a large polytomy close to the base of Somphospondyli is resolved through the pruning of Padillasaurus and Sauroposeidon.

Are Jiangshanosaurus and Dongyangosaurus derived titanosaurs?
The results from our analyses of the revised data matrix consistently place Jiangshanosaurus and Dongyangosaurus in a more 'basal' position than previous iterations, without close affinities to the latest Cretaceous derived titanosaurs Alamosaurus and Opisthocoelicaudia. Jiangshanosaurus is placed in the endemic East Asian somphospondylan clade Euhelopodidae (i.e. outside Titanosauria) in the EWP analysis (figure 5a), but clusters with the Australian taxon Diamantinasaurus, as a lithostrotian titanosaur, in the EIW3 analysis (figure 5b). In our EIW9 topology, Jiangshanosaurus and Dongyangosaurus form a clade that is the sister taxon to most other titanosaurs, with Huabeisaurus the successive outgroup (figure 5c). Dongyangosaurus and Huabeisaurus form a clade in our EWP analysis, with this grouping being the sister taxon to Titanosauria (figure 5a). Both taxa are part of a paraphyletic array of 'basal' somphospondylans in our EIW3 analysis, although the stemwards shift of Andesaurus means that nearly all somphospondylans are recovered within Titanosauria in this topology (see also previous iterations of this matrix), as well as that of our EIW9 analysis (figure 5b,c). Below, our use of the clade name Titanosauria refers to the topology recovered in our EWP analysis.
As detailed above, very little of the anatomy of Jiangshanosaurus supports 'derived' titanosaurian affinities. Most features are plesiomorphic for Titanosauriformes or Somphospondyli, especially in the vertebrae. The one exception is that the dorsal margins of the scapula and coracoid are approximately level with one another in Jiangshanosaurus (figure 4a,b), a feature that is otherwise restricted to Titanosauria [75]. All of the features uniting Jiangshanosaurus with Diamantinasaurus are optimized either as reversals to the plesiomorphic state, and/or also characterize taxa outside of Titanosauria too.
Dongyangosaurus shares some features with titanosaurs, including the posterior expansion of the first caudal rib [69], and a strongly concave acetabular margin on the ischium [40]. Other anatomical features generally have a wider distribution among Somphospondyli. Its position as close to the titanosaur radiation is therefore in keeping with this character combination.   [36], and Euhelopus zdanskyi from the Berriasian-Valanginian [96] of China [97]. Fragmentary remains from approximately contemporaneous Japanese deposits might also represent somphospondylans (e.g. [98]). No further somphospondylans are known from pre-Barremian deposits, but their absence might reflect the global scarcity of Berriasian-Hauterivian-aged terrestrial sedimentary rocks [99,100], rather than a genuine pattern. By the Barremian-Aptian, somphospondylans had acquired a near-global distribution, including multiple taxa in the USA, across Europe and in East Asia (figure 6). All of the taxa known from the Barremian-Albian of the USA (Astrophocaudia slaughteri, Brontomerus mcintoshi, Sauroposeidon proteles [='Paluxysaurus jonesi']) are 'basal' somphospondylans [40,94], that lie outside of Titanosauria in our EWP analyses (figure 5a). Within Somphospondyli, the phylogenetic affinities of these North American taxa are poorly constrained. Astrophocaudia and Brontomerus are highly unstable [41,94,101], and different analyses result in Sauroposeidon clustering with a globally distributed array of taxa (e.g. figure 5). Of note is that the contemporaneous OTU comprising a somphospondylan from the Cloverly Formation ('Cloverly titanosauriform') is recovered as the sister taxon to Sauroposeidon in our EIW9 analysis (figure 5c), which would support the referral of this material to that taxon by D'Emic & Foreman [102]. Stratigraphically younger sauropods are unknown from North America until the Maastrichtian, with the appearance of Alamosaurus sanjuanensis ( [65,103]; though see Ryan & Evans [104] for a possible Santonian sauropod occurrence from Canada), although whether this 'sauropod hiatus' reflects an extinction followed by 're-invasion', a sampling bias or some combination of both, remains uncertain [9,105].
The late Barremian-early Aptian Spanish sauropods, Europatitan eastwoodi and Tastavinsaurus sanzi, are recovered as 'basal' somphospondylans here (figure 5), as has been proposed in several other analyses [40,41,84,106]. In agreement with Torcida Fernández-Baldor et al. [84], our results suggest that they are not sister taxa, and possibly not closely related to one another (figure 5a). As is the case with contemporaneous North American somphospondylans, these Spanish genera cluster with taxa with a near-global distribution. Additional Barremian-aged remains come from the UK and include: (i) a cervical vertebra that potentially comes from a sauropod with close affinities to Sauroposeidon [41,107] A small number of additional occurrences provide further support for the presence of titanosaurs in the late Early Cretaceous to Cenomanian of western Europe [39,42]. These include a caudal vertebra from the late Aptian-early Albian of Italy, and postcrania from the Cenomanian of Spain (figure 6), both of which have been suggested to be allied with Gondwanan titanosaurs [42,47]. Le Loeuff et al. [46] erected Normanniasaurus genceyi as a 'basal' titanosaur from the Albian of France. Titanosaurian affinities for Normanniasaurus have subsequently been supported through phylogenetic analyses [30,42,108], although our study is the first to incorporate it based on first-hand observations. All three of our analyses place Normanniasaurus with Gondwanan titanosaurian taxa, clustering either with: (i) Lognkosauria (EWP) (figure 5a), in which it is the sister taxon to this clade of Late Cretaceous Argentinean titanosaurs [5,70]; (ii) Aeolosaurini (EIW3) (figure 5b), in which it forms a clade with Aeolosaurus+Rapetosaurus krausei, from the latest Cretaceous of South America [10] and Madagascar [25], respectively; or (iii) as the sister taxon to most other titanosaurs (EIW9; figure 5c). An aeolosaurine position is similar to that found by Gorscak et al. [30], and some independent phylogenetic analyses recover a clade containing Lognkosauria and Aeolosaurini (e.g. [5,109]). In both the EWP and EIW3 scenarios presented here, these two groups are nested within a large clade of Gondwanan taxa. This includes the latest Cretaceous Indo-Madagascan taxa Jainosaurus septentrionalis and Vahiny depereti, which are sister taxa, forming a clade with the approximately contemporaneous Argentinean taxon Antarctosaurus wichmannianus ( figure 5a,b), as suggested by previous authors [70,85,87]. In our EIW9 topology (figure 5c), the clade that includes Lognkosauria and Epachthosaurus sciuttoi lies outside of Lithostrotia, whereas these taxa are lithostrotians in our other two analyses (and previous iterations of this matrix). A similar result, in which Lognkosauria and Lithostrotia are essentially sister clades, was recovered by Carballido et al. [5].
Three Early Cretaceous somphospondylan taxa have recently been named from across present-day Russia ( figure 6), although all are based on relatively incomplete material. Sibirotitan astrosacralis is from the Barremian-Aptian of western Siberia, and appears to represent a non-titanosaurian somphospondylan [110]. Contemporaneous remains from south-central Russia were described as Tengrisaurus starkovi by Averianov & Skutschas [45], who recovered this taxon within Lithostrotia. It is not currently clear to which taxa Sibirotitan and Tengrisaurus are most closely related [43,45,110]. Stratigraphically pre-dating these occurrences, Averianov & Efimov [43] erected Volgatitan simbirskiensis from the late Hauterivian of western Russia. Volgatitan was placed close to the 'base' of the clade that includes Lognkosauria and Rinconsauria in that study, suggesting affinities with Gondwanan taxa [43]. Although Normanniasaurus also clusters with Lognkosauria in our EWP analysis, it appears to represent a lineage that is clearly distinct from Volgatitan. As such, it appears that titanosaurs were present across western Eurasia from the late Hauterivian-Barremian (approx. 130 Ma) onwards, and that these Eurasian lineages lie within a largely Gondwanan clade. Several authors have suggested that these Early Cretaceous-Cenomanian European somphospondylans can be explained by dispersal between north Africa and southern Europe (e.g. [38,42,47,84,95,111,112]), with some palaeogeographic support for a land connection, known as the Apulian Route, at least during the Berriasian-Barremian [113][114][115] or Hauterivian-Aptian [112]. Post-Cenomanian, there are no sauropod body fossils in Europe until the Santonian; this absence mirrors that of the North American 'hiatus' and most likely reflects the dearth of suitable terrestrial sedimentary rocks during this interval [39,105,116].
Although our EWP analysis suggests that neither Dongyangosaurus nor Jiangshanosaurus are titanosaurs, results from both of our EIW analyses mean that their titanosaurian affinities remain equivocal. Following our augmented scoring, Ruyangosaurus giganteus is a 'basal' titanosaur in the EWP analysis (figure 5a), and a euhelopodid (sensu [40]) in the EIW analyses (figure 5b,c). Li et al. [54] recovered Yongjinglong datangi as a titanosaur in three independent phylogenetic analyses, including an earlier iteration of the matrix used here [41]. By contrast, all of our analyses support a placement within Euhelopodidae ( figure 5). This clade is diverse in all analyses, with a further six 'middle' Cretaceous East Asian taxa consistently included (Erketu ellisoni, Euhelopus zdanskyi, Gobititan shenzhouensis, Phuwiangosaurus sirindhornae, Qiaowanlong kangxii and Tangvayosaurus hoffeti). Most of these taxa have been recovered in Euhelopodidae in previous analyses too (e.g. [40,41] [40,50,117]. Based on our current knowledge, Euhelopodidae seems to have been endemic to East Asia, although there are remains from the Late Jurassic (Oceantotitan; [95]) and Barremian (teeth; [118]) of western Europe, and Tithonian of Tanzania (Australodocus; [71]), that share some features with members of this clade.
Although it seems that most 'middle' Cretaceous Asian sauropods are 'basal' somphospondylans, one late Early Cretaceous Chinese sauropod is recovered within Titanosauria in all three analyses, and another in two analyses. Daxiatitan binglingi (Barremian-Aptian) and Xianshanosaurus shijiagouensis (Aptian-Albian [119]) are sister taxa, just outside of Lithostrotia, in our EWP analysis (figure 5a). Daxiatitan occupies the same position in our EIW3 analysis, whereas Xianshanosaurus is recovered as a 'basal' lithostrotian in both EIW analyses (figure 5b,c). By contrast, Daxiatitan is placed outside of Titanosauria in our EIW9 analysis (figure 5c). Combined with the caudal vertebra PMU 24709, from the Aptian-Albian of China [55], which most likely represents a titanosaur [41,49], these taxa suggest that titanosaurs had dispersed into East Asia by the Barremian-Aptian (approx. . Moreover, a number of fragmentary and isolated remains from Central Asia (Kazakhstan, Kyrgyzstan, Tajikistan and Uzbekistan) document the continued presence of probable titanosaurs in the early Late Cretaceous of Eurasia [51,120].
Previous iterations of the data matrix used herein (e.g. [41,71]) have consistently recovered Jiangshanosaurus as the sister taxon of Alamosaurus, with a close relationship also proposed in the original publication of Tang et al. [60]. Alamosaurus is known from the Maastrichtian of the USA [14,64], and is currently the only recognized titanosaur from North America [65,121]. Its biogeographic origin has long been the subject of debate [9,74,103,105,122], with alternative phylogenetic hypotheses supporting dispersal from either: (i) South America, based on a sister taxon relationship with latest Cretaceous taxa such as Baurutitan britoi or Saltasaurus loricatus (e.g. [1,38,40]); or (ii) East Asia, based on a sister taxon relationship with Opisthocoelicaudia skarzynskii (e.g. [74,109]), from the Maastrichtian of Mongolia [68]. Our previous result of a Jiangshanosaurus+Alamosaurus clade therefore led to the suggestion that the Alamosaurus lineage dispersed from East Asia at some point during the Late Cretaceous [41]. Revision of Jiangshanosaurus has removed this relationship, but does not resolve the biogeographic ancestry of the Alamosaurus lineage: our EWP analysis finds Alamosaurus nested with Gondwanan taxa (figure 5a), whereas our EIW topologies restore Opisthocoelicaudia as its sister taxon (figure 5b,c). Additional, well-preserved specimens of Alamosaurus might eventually shed light on its affinities [121,122]. Despite being one of the best-known titanosaurs, Opisthocoelicaudia has not been included in a phylogenetic analysis based on first-hand study, and many anatomical features cannot be adequately assessed from the photographs and illustrations in the original and sole publication [68]. The recent rediscovery of the type locality of the contemporaneous titanosaur Nemegtosaurus mongoliensis has added postcranial remains to a taxon previously known only from its skull [27,123]: these have yet to be fully described [124]. Whereas some authors have suggested that Nemegtosaurus might be synonymous with Opisthocoelicaudia (e.g. [124]), these new specimens, as well as additional remains from nearby coeval deposits (including Quaesitosaurus orientalis; [125]), suggest that they represent distinct taxa [126]. Although fragmentary, Qingxiusaurus youjiangensis [17], Sonidosaurus saihangaobiensis [127] and Zhuchengtitan zangjiazhuangensis [18] also point to a higher diversity of latest Cretaceous East Asian titanosaurs. Further study of these taxa will be critical in resolving the roles of East Asia versus South America in the appearance of Alamosaurus in the latest Cretaceous of the USA.
There is a rich record of titanosaurs in the late Campanian-Maastrichtian of Europe, primarily from France, Spain and Romania [115,128], although most taxa have only been recognized in the last two decades [129]. Magyarosaurus dacus, from the early Maastrichtian of Romania [12], was the first to be described, although it is taxonomically problematic, given that it is unclear which skeletal remains are referable [19]. The recognition of a second contemporaneous Romanian titanosaur, Paludititan nalatzensis, further complicates this situation [19]. Ampelosaurus atacis and Atsinganosaurus velauciensis have been described from the early Maastrichtian and late Campanian-early Maastrichtian, respectively, of France [15,20]. Two titanosaurs have also been named from Spain: the late Campanian taxon Lirainosaurus astibiae [16], and Lohuecotitan pandafilandi, from the late Campanian-early Maastrichtian [21]. These European taxa are generally underrepresented in most phylogenetic analyses, with none incorporated in either Carballido et al. [5] or the data matrix used here. By contrast, with the exception of Magyarosaurus, all of them were included in both Díez Díaz et al. [108] and Sallam et al. [66]; see also [130]. However, the former consists of a data matrix comprising 29 taxa scored for just 77 characters, and none of the European taxa was scored based on first-hand observations in the analysis of Sallam et al. [66]. Nevertheless, Díez Díaz et al. [108] erected the 'derived' titanosaur clade Lirainosaurinae to group Lirainosaurus and the two French taxa, which was nested among primarily Gondwanan taxa. They also recovered Lohuecotitan and Paludititan as sister taxa, but close to the 'base' of Lithostrotia. The  [130] separated Atsinganosaurus from the other European taxa, placing it within Lognkosauria. The remaining European taxa were recovered in a clade of predominantly Laurasian taxa (also containing Nemegtosaurus and Opisthocoelicaudia), although this also included the middle Campanian Egyptian titanosaur Mansourasaurus shahinae. Alamosaurus and several South American taxa either formed the sister taxon to this clade [66], or were nested within it [130]. Several authors have suggested that these latest Cretaceous titanosaurs dispersed into Eurasia from Africa (e.g. [39,66,131]), possibly via a re-emergent Apulian Route [114].
In summary, Somphospondyli must have evolved by the early Late Jurassic. Given that we have good evidence for the clade in the earliest Cretaceous of Brazil and China (and possibly in the Late Jurassic of Portugal and Tanzania), and elsewhere from the Barremian-Aptian onwards, this suggests that the group had a near-global distribution early in its known evolutionary history ( figure 6). It is possible that much of this is currently unsampled. The earliest unambiguous titanosaurian remains are late Hauterivian in age, and the clade was present in Africa, Asia, Europe and South America by the Aptian ( figure 6). As such, the evidence points to the diversification and widespread distribution of titanosaurs by at least approximately 43,69]. Given that the oldest known remains are Eurasian, rather than Gondwanan, the origin and early evolutionary history of Titanosauria remains uncertain. Many Laurasian titanosaurs appear to be closely related to Gondwanan taxa, but much of their biogeographic history is currently unclear. Further study and incorporation of additional Laurasian taxa into large-scale, global phylogenetic analyses, as well as the revision and/or augmentation of key taxa (e.g. Nemegtosaurus, Opisthocoelicaudia), is therefore critical to elucidating the evolutionary relationships and biogeographic history of titanosaurs.

Conclusion
A full re-description of the early Late Cretaceous titanosauriform sauropod Jiangshanosaurus lixianensis, previously regarded as a derived titanosaur, demonstrates that it almost entirely lacks titanosaurian features, and is most likely a 'basal' member of Somphospondyli. New anatomical information on the contemporaneous taxon Dongyangosaurus sinensis suggests that it also lies outside of Titanosauria, although it is probably closer to this radiation than Jiangshanosaurus. Although most other 'middle' Cretaceous sauropods from East Asia are also probably non-titanosaurian somphospondylans, at least two genera (Daxiatitan and Xianshanosaurus) appear to belong to the titanosaur radiation. Combined with these and other approximately contemporaneous European titanosaurs, the recovery of the late Early Cretaceous French sauropod Normanniasaurus genceyi as a 'derived' titanosaur, nested with Gondwanan taxa, provides further support for a widespread distribution of this clade by the Early Cretaceous.
Data accessibility. The datasets supporting this article have been uploaded as part of the electronic supplementary material.