Modulation of lipid biosynthesis by stress in diatoms

Diatoms are responsible for up to 40% of the carbon fixation in our oceans. The fixed carbon is moved through carbon metabolism towards the synthesis of organic molecules that are consumed through interlocking foodwebs, and this process is strongly impacted by the abiotic environment. However, it has become evident that diatoms can be used as ‘platform’ organisms for the production of high valuable bio-products such as lipids, pigments and carbohydrates where stress conditions can be used to direct carbon metabolism towards the commercial production of these compounds. In the first section of this review, some aspects of carbon metabolism in diatoms and how it is impacted by environmental factors are briefly described. The second section is focused on the biosynthesis of lipids and in particular omega-3 long-chain polyunsaturated fatty acids and how low temperature stress impacts on the production of these compounds. In a third section, we review the recent advances in bioengineering for lipid production. Finally, we discuss new perspectives for designing strains for the sustainable production of high-value lipids. This article is part of the themed issue ‘The peculiar carbon metabolism in diatoms’.

Diatoms are responsible for up to 40% of the carbon fixation in our oceans. The fixed carbon is moved through carbon metabolism towards the synthesis of organic molecules that are consumed through interlocking foodwebs, and this process is strongly impacted by the abiotic environment. However, it has become evident that diatoms can be used as 'platform' organisms for the production of high valuable bio-products such as lipids, pigments and carbohydrates where stress conditions can be used to direct carbon metabolism towards the commercial production of these compounds. In the first section of this review, some aspects of carbon metabolism in diatoms and how it is impacted by environmental factors are briefly described. The second section is focused on the biosynthesis of lipids and in particular omega-3 long-chain polyunsaturated fatty acids and how low temperature stress impacts on the production of these compounds. In a third section, we review the recent advances in bioengineering for lipid production. Finally, we discuss new perspectives for designing strains for the sustainable production of high-value lipids.
This article is part of the themed issue 'The peculiar carbon metabolism in diatoms'.

Diatoms and the use of carbon in their metabolism (a) Availability of carbon in marine environment
Inorganic carbon (Ci) in the atmosphere has dramatically increased during the industrial era to exceed 400 ppm CO 2 in 2016, whereas it did not exceed 300 ppm before the industrial revolution [1]. CO 2 dissolution and biological carbon fixation (the so-called 'biological pump') make the oceans the main Ci sink on Earth. The former mechanism depends on atmospheric CO 2 pressure, temperature, salinity and pH. At the usual pH of seawater, around 8.0-8.3, the dissolved inorganic carbon (DIC) is mainly in the form of HCO À 3 , so that the equilibrium concentration of CO 2 ranges between 10 and 20 mM [2,3]. Air-equilibrated seawater contains some 180 times more ionic Ci (HCO À 3 and CO 2À 3 ) than CO 2 [4]. Altogether, the oceans have taken up approximately 30% of the anthropogenic CO 2 emissions causing ocean pH decrease and temperature increase.
The biological pump relies on carbon fixation by photosynthetic organisms living freely or in symbiosis. However, CO 2 concentration in seawater is low regarding the affinity of ribulose-1,5-bisphosphate carboxylase/oxygenase (Rubisco), the key enzyme of CO 2 fixation. Indeed, the half-saturation constant of Rubisco measured in diatoms ranges between 30 and 40 mM [5]. To supply efficiently Rubisco, some marine diatoms, as well as other microalgae, can take up both CO 2 and HCO À 3 from seawater and concentrate CO 2 close to Rubisco [6,7] using CO 2 -concentrating mechanisms (CCM) involving different carbonic anhydrase isoforms [8][9][10][11][12]. Moreover, a C 4  diatom species could play a role in CCM [13][14][15]. Altogether, about half of the Earth's primary production takes place in unicellular microalgae [16]. Diatoms contribute up to 20% of global carbon fixation and thus play a major ecological role as primary producers [17][18][19]. When these organisms die, they settle on the seabed where carbon is sequestrated for geological timescales and might ultimately result in fossil fuels.

(b) Regulation of carbon metabolism: the influence of inorganic carbon availability
All the environmental factors such as temperature, irradiance levels and chemical compounds (heavy metals and nutrients) influence carbon metabolism. In this section, only the influence of inorganic carbon availability on diatom metabolism will be discussed. Regardless of the Ci form taken up by diatoms, Ci is finally reduced into carbohydrates during photosynthesis. These molecules are necessary for cell growth, respiration and synthesis of the other cell organic compounds (e.g. [20]). Diatoms export triose phosphates from the plastids and, under nutrient-replete conditions, store them in cytosolic vacuoles as the b-1,3-glucan polymer, namely chrysolaminarin [21,22] during the day, catabolizing this in the dark [23]. In diatoms living in microphytobenthic communities, carbohydrates largely contribute to the production of extracellular polymeric substances [24]. Changes of the environmental parameters that impact photosynthesis trigger modifications of the relative activity of the different metabolic pathways, resulting in lipid accumulation [25] that can increase the cell's buoyancy [22,26]. Caballero et al. [23] observed little change in chrysolaminarin accumulation or consumption during nitrogen starvation in Phaeodactylum tricornutum. Song et al. [27] demonstrated that gas flow rate in the culture medium plays an important role in P. tricornutum growth and production of lipid that is mostly composed of saturated and monounsaturated fatty acids (MUFA). When the CO 2À 3 /HCO À 3 ratio increases to 0.125, the content of C16 : 1 increases to the highest value of 57%. The effects of CO 2 concentration on C : N : P ratio in six diatoms show different trends according to the species and the light regime. In the range of dissolved CO 2 from 1.5 to 37.7 mmol kg 21 , either C : N and C : P ratios stay almost constant in P. tricornutum, decrease as in Thalassiosira weisflogii or increase in Amphora glacialis [28]. A CO 2dependent decrease in growth rate was observed at dissolved CO 2 concentration below 10 mmol kg 21 . Boelen et al. [29] reported that the photophysiological performance of the marine Antarctic diatom Chaetoceros brevis is not significantly affected by a pCO 2 ranging from 190 to 750 ppmv under different irradiance regimes.
Although it is usually considered that diatoms are not mixotrophic [30], it has been reported that repeated additions of organic substrate such as urea [31] or acetate [32] can sustain mixotrophic growth of P. tricornutum UTEX-640 and Skeletonema costatum, respectively. Light intensity and quality impact on pigment contents, photosynthesis and nutritional value of diatoms [33,34], with photosynthesis/irradiance curves commonly used to characterize photoacclimation [35 -37]. Generally, benthic diatoms have a lower maximum net photosynthesis but a higher light utilization coefficient than planktonic species [10,38]. Because chlorophyll a and carotenoid contents vary according to light environment and structural rearrangement inside chloroplasts [33,39], the motile benthic diatom Navicula cf. recens uses motility to select the optimal light exposure according to its photophysiological preferences.

Lipid accumulation and omega-3 long-chain polyunsaturated fatty acid biosynthesis in diatoms (a) Glycerolipid biosynthesis
Many microalgae accumulate triacylglycerols (TAGs) in response to changes in environmental conditions. Depending on the cultivation conditions, some oleaginous species of diatoms have the ability to produce lipids up to 40 -60% of the biomass and synthesize high content of highly valuable omega-3 long-chain polyunsaturated fatty acids (LC-PUFAs) such as eicosapentaenoic acid (20 : 5D 5,8,11,14,17 , EPA) and docosahexaenoic acid (22 : 6D 4,7,10,13,16,19 , DHA) (table 1). However, the mechanisms of the high lipid production in these organisms remain unclear. Fatty acid and glycerolipid biosynthesis have been studied in detail in the model plant Arabidopsis thaliana [51]. Similar pathways are predicted to occur in diatoms [52]. In photosynthetic organisms, the production of LC-PUFAs begins with de novo fatty acid synthesis in the plastids [53]. The first committed step is the formation of malonyl-CoA following the carboxylation of acetyl-CoA, catalysed by acetyl-CoA carboxylase (ACCase), a multi-subunit enzyme found in most prokaryotes and in the chloroplasts of plants and algae. The malonyl-CoA produced from the carboxylation of acetyl-CoA by ACCase is the central carbon donor for fatty acid synthesis. The fatty acid synthase (FAS) multi-subunit complex catalyses the production of C16 : 0 and C18 : 0 fatty acids (figure 1). Before entering the fatty acid synthesis cycle, the malonyl group of malonyl-CoA is transferred by malonyltransferase (MAT) to the cofactor acyl carrier protein (ACP) to form malonyl-ACP, which then undergoes a series of condensation reactions with acetyl-CoA, catalysed by a bketoacyl-ACP synthase (KAS) [51]. The candidate activities involved in fatty acid biosynthesis in diatoms have not yet been functionally characterized. Each FAS cycle of reactions leads to the extension of the fatty acid chain by two carbon atoms, usually ending with the synthesis of saturated C16 : 0-and C18 : 0-ACPs. These acyl groups are then either retained in the plastids where they are transferred by chloroplastic acyltransferase to glycerol-3-phosphate (G3P) for incorporation into organellar membrane lipids (the so-called 'prokaryotic' pathway) or are hydrolysed from ACP by specific fatty acyl-ACP thioesterases (FATs) that release free fatty acids (FFA) in the inner envelope of the chloroplast. Some FATs can also release fatty acids containing upto 14 carbons. Alternatively, C16 : 0-and C18 : 0-ACPs can be desaturated by soluble palmitoylor/and stearoyl-ACP desaturases and subsequently released by FATs. These FFA are exported to the cytosol and are esterified to coenzyme A (CoA) by a long-chain acyl-CoA synthase (LACS) located in the outer envelope of the plastid to form acyl-CoAs [54]. The precise mechanism for this export step in algae is unknown and requires further investigation. By analogy with higher plants, it is predicted that these extraplastidic acyl-CoA esters are then transferred to endoplasmic reticulum (ER) or acylated onto a phospholipid backbone by the action of lysophosphatidylcholine acyltransferase (LPCAT) where they can undergo modifications before further participation in the synthesis of membrane lipids or storage TAGs ('eukaryotic' pathway).
In chloroplasts, the prokaryotic pathway generates PA and DAG and lipids such as galactolipids (monogalactosyldiacylglycerol, MGDG, and digalactosyldiacylglycerol, DGDG), sulfoquinovosyldiacylglycerol (SQDG) and phosphatidylglycerol (PG) [52,55]. Lipids synthesized in the chloroplast are characterized by the presence of a C16 acyl group at the sn-2 position of the glycerol backbone. In diatoms, the chloroplast is assumed to have originated from a secondary endosymbiosis event [52] and is surrounded by four membranes, representing a possible continuum between the ER and the outermost membrane of the plastid [56]. Therefore, the precise localization of the lipids synthesized via the prokaryotic pathway is difficult to predict.
In eukaryotes, TAG synthesis occurs via the Kennedy pathway [57] through the stepwise esterification of G3P and occurs in the microsomal fraction, presumptively the ER. The transfer Dephosphorylation at the sn-3 position of PA by phosphatidic acid phosphatase (PAP) generates diacylglycerol (DAG). Both PA and DAG are precursors for TAG and membrane phospholipids (mainly phosphatidylcholine, PC, and phosphatidylethanolamine, PE) biosynthesis. Diatoms also synthesize non-phosphorus glycerolipids, the so-called betaine lipids (BL), that are not found in higher plants [58]. BLs contain a polar amino-acyl group linked by an ether bond to the sn-3 position of the glycerol backbone. These lipids are presumably located in extra-plastidial membranes and may be involved in the transfer of fatty acids from the cytoplasm to the chloroplast. Comprehensive study of the glycerolipid content of P. tricornutum revealed the presence of diacylglyceryl hydroxymethyltrimethyl-b-alanine (DGTA), which has been found in some other algae [59]. Together with PC, it represents the major lipids present in the extra-plastidial membranes of P. tricornutum.
In plant seeds, large amounts of unsaturated fatty acids are synthesized on PC [60]. PC can undergo an acyl-editing cycle (the eponymous Lands cycle), by hydrolysis of the fatty acid at the sn-2 position, followed by a re-acylation with a fatty acid derived from the acyl-CoA pool [61]. Polar head exchanges can also occur by the action of a PC-DAG phosphocholine transferase (PDCT) [60]. In many plants, PC acyl editing and phosphocholine headgroup exchange between PC and DAGs control the majority of acyl fluxes through PC to provide PUFA for TAG synthesis [62]. It is unclear whether the same PC turnover occurs in diatoms, and given the abundance of BL, if that lipid also might act as either an acyl donor or receiver for this process.
The final step of the Kennedy pathway for the production of TAG is the acylation of 1-2-DAG on the sn-3 positions which can be achieved either with an acyl-CoA, catalysed by diacylglycerol acyltransferase (DGAT) or by transfer of an acyl-chain from PC by phospholipid : diacylglycerol acyltransferase (PDAT). Two types of DGAT isoforms, DGAT1 and DGAT2, are membrane-bound acyltransferases and play a major role in TAG biosynthesis. Most eukaryotic organisms contain a single copy of each DGAT gene, while photosynthetic microalgae appear to have multiple copies of DGAT2 genes: four putative DGAT2 genes have been identified in the diatom Fragilariopsis cylindrus and five isoforms have been found in P. tricornutum [63]. Accumulation of LC-PUFAs in glycerolipids has been studied in P. tricornutum [59] and Fistulifera solaris [64]. Complete characterization of P. tricornutum glycerolipidome in low-phosphate and lownitrogen conditions demonstrated that the production of TAG most likely relied on a DAG substrate synthesized via the Kennedy pathway and on the combined activity of a DGAT and a PDAT adding a third acyl-group at position sn-3 [59]. A similar mechanism for EPA incorporation into TAG was observed in Fi. solaris, suggesting that EPA was desaturated on PC and the PC-based acyl-editing and headgroup exchange processes may contribute to the EPA incorporation into TAG [64].
Major activities of TAG biosynthesis have been annotated and partially characterized in several diatom genome sequences [65][66][67]. However, the precise subcellular localization of the diatom enzymes involved in fatty acid and glycerolipid biosynthesis continues to require further investigation.
In DHA-accumulating microbes, the conversion of EPA to DHA may be carried out by the 'microbial' linear desaturationelongation pathway [71]. In diatoms, EPA is most likely elongated by a specific D5-elongase to docosapentaenoic acid (DPA; 22 : 5 D7, 10,13,16,19) which is then desaturated by a D4-specific desaturase to yield DHA.
All the corresponding genes encoding putative desaturases and elongases have been identified in diatoms and the presence of a highly active 'conventional' D6-pathway has been demonstrated for several diatom species such as P. tricornutum [72 -75], T. pseudonana [76], F. cylindrus [77], Nitzchia sp. [78] and Fi. solaris [67]. Functional characterization of candidate activities involved in EPA and DHA biosynthesis from P. tricornutum and T. pseudonana indicates that these have the capacity to use both omega-6 and omega-3 intermediates to synthesize EPA and DHA [73,74,76].
LC-PUFA biosynthesis has been well studied in the model diatom P. tricornutum, in which the majority of EPA accumulates in polar lipids, especially in galactolipids such as MGDG and DGDG [59,79,80]. In vivo labelling in P. tricornutum revealed that EPA can apparently be synthesized by a number of different routes, involving D6-and D8-pathways with the predominant route proceeding via D6-desaturation of LA and using intermediates of v6-and v3-pathways [81]. Both D6-and D5-desaturation [73] and D6-elongation take place in the ER, and newly synthesized EPA is then imported into the plastids for incorporation into galactolipids [52,55]. Studies of the heterologous expression of P. tricornutum desaturases in yeast indicate that these are phospholipiddependent activities (contrary to LC-PUFA elongases that use acyl-CoA as substrates), providing evidence that the substrate-dichotomy issue also exists in diatoms [72,82]. As the P. tricornutum lipidome contains only minor amounts of fatty acid intermediates of the EPA biosynthetic pathway, the accumulation of EPA as a single end-product is highly efficient in this diatom. Although P. tricornutum synthesizes small amounts of DHA and the putative gene encoding a D4-desaturase has been identified through sequence comparison, the activity of this candidate desaturase has yet to be confirmed. The absence of sequences associated with the 'alternative' D8-pathway may indicate that some of the activities associated with the conventional pathway also have (under some circumstances) the capacity to accept alternative substrates.
One unusual feature of the predicted pathways for LC-PUFA biosynthesis in two species of diatoms, P. tricornutum and Fi. solaris, is the apparent absence of predicted v3-desaturases localized in the ER [55,83]. Such enzymes, including D15-, D17-and hypothetical D19-desaturases, convert v6-fatty acids into their v3-counterparts [84], and are considered to be essential for the enrichment of v3-fatty acids over v6 forms. In genome sequences for both these diatoms, only a single candidate gene for a plastidial v3desaturase has been identified. This raises the possibility of a dual localization of these putative plastidial v3-desaturases, with access to both plastidial and ER-located substrates, similar to that found in Chlamydomonas reinhardtii [85].

(c) Regulation of eicosapentaenoic acid synthesis
During the past decade, all the primary activities required for the biosynthesis of LC-PUFA (elongases and desaturases) have been identified from multiple different species, and omega-3 biosynthesis has been successfully reconstituted in plants and microorganisms [86,87]. During PUFA synthesis, regulation occurs as a consequence of numerous factors [88] and environmental factors such as nutrients, light or temperature [89].

(i) Influence of carbon availability
A carbon source is absolutely required for lipid and fatty acid accumulation. Indeed, without this source, independently of nutrient deprivation, biomass or lipid synthesis is not possible. Diatoms, being photoautotrophic eukaryotes, use Ci such as CO 2 as their carbon source and light as their energy source, thus participating in the reduction of atmospheric CO 2 [20,90]. Bicarbonate has been shown to increase lipid accumulation in P. tricornutum [91]. This effect does not result from bicarbonate addition per se but from the concomitant pH increase [92]. Using 13 C labelling, an equal incorporation of 13 C carbon from bicarbonate has been observed in the C16 fatty acid chains incorporated into TAGs and PC, indicating that P. tricornutum is able to assimilate similar amounts of carbon regardless of nitrate availability. This suggests that an other internal lipid pool such as BL could be involved in TAG or PC synthesis [93].
In P. tricornutum, high levels of CO 2 (0.15%) induce an increase in LC-PUFA levels, representing more than 16% of dry cell mass by comparison with around 7 and 8% obtained, respectively, with low (0.015%) and mid-CO 2 (atmospheric, 0.035%) cultured cells [88]. The EPA content represents about 11.6% dry cell mass with high CO 2 levels and 5-7% of dry cell mass under low and mid-CO 2 conditions. However, the influence of CO 2 concentration depends on the studied diatom species and specifically, the levels of EPA in the diatom concerned. Notably, P. tricornutum is rich in EPA and, rstb.royalsocietypublishing.org Phil. Trans. R. Soc. B 372: 20160407 consequently, levels of CO 2 enhance EPA productivity. By contrast, Chaetoceros muelleri with low PUFA content [94] has no change in its EPA content when CO 2 concentrations vary from 0.03 to 30% [95].
Mixotrophy with glycerol as a carbon source and ammonium as a nitrogen source enhances growth of P. tricornutum. The periodic supplementation of culture medium with glycerol and ammonium chloride increased the productivity of EPA by a factor of 10 when compared with photoautotrophically control conditions [96] (see also Finazzi [97]).

(ii) Influence of other nutrients
In response to salt stress, diatoms are able to change their lipid and fatty acid compositions to modify their membrane permeability. For example, Nitzschia laevis, Chen et al. [98] by testing different salt concentrations (from 10 to 30 g l 21 ) in Nitzschia laevis, have shown that the highest levels of EPA were obtained with a salt concentration of 20 g l 21 , in parallel with the highest level of galactolipids and phospholipids, with EPA representing more than 70% of the total fatty acids in these polar fractions. These changes in the unsaturation of membrane lipids were suggested to be related to a modification of membrane permeability and fluidity under salt concentration as an acclimation to salinity stress.
Among nitrogen sources that can be used by diatoms, NaNO 3 , NH 4 Cl and urea have been tested in Cylindrotheca fusiformis and Cylindrotheca closterium. Whatever the nitrogen source, EPA levels were not modified, even though the maximum lipid accumulation was observed with NH 4 Cl in both species [99].

(iii) Environmental factors
Environmental factors have different effects on lipid and fatty acid production in P. tricornutum. Salinity, nitrogen concentration, light intensity or temperature can act differently on fatty acid composition and total fatty acid content. Indeed, with a salinity from 15 to 35 ppt or with different irradiance levels (50 - [100]. Light. In the marine diatom S. costatum, the highest amounts of EPA are obtained at the end of the logarithmic growth phase and during the stationary phase under high light levels (saturating irradiance) [32].
The quality and strength of UV irradiance also has distinct effects on fatty acid composition in diatoms. It has been reported that in benthic diatoms, even if modifications of fatty acid composition can occur after long-term (30 days) exposure to UV treatments, the UV-A exposure induces an increase in saturated fatty acids, while the UV-B exposure increased the unsaturated fatty acid (EPA) levels. Lipid content was increased after a short-term (6 h) UV-B exposure [101].
Temperature. Low temperature impacts lipid synthesis. For instance, when P. tricornutum is grown at 228C for 8 days and then shifted to 108C, the percentage of lipids increased [89] (table 2). Within 24 h after the temperature shift, a 61% increase was observed (table 2), suggesting that the mechanisms involved in the acclimation to low temperature are very rapid. The relative amount of EPA was modified in response to decreased temperature: it was increased by more than 17% within 48 h after the temperature shift and reached 38% after 4 days of thermal stress (table 2). The EPA enrichment can be even further increased by supplementing the growth medium with nitrogen and phosphate [89]. Similar results have been obtained with Odontella aurita. This diatom is used in aquaculture and in human nutrition [102]. In this taxon, the levels of DHA were also higher than when the diatoms were grown at room temperature [103].

Bioengineering in diatoms
Advances in next-generation sequencing technology and genetic transformation techniques together with transcriptomics, proteomics and metabolomics studies have greatly contributed to algal research. During the past few years, nuclear genomes of the pennate diatoms P. tricornutum, Fi. solaris and F. cylindrus and the centric diatom T. pseudonana have been sequenced, providing insights into the genome evolution of these distinctive groups [65][66][67]104]. Based on Table 2. Total lipid content (% of biomass) and EPA distribution (% of total fatty acids) in control (228C) and stressed cultures (108C) of P. tricornutum after 1, 2, 4 and 8 days of temperature stress. For the methods used for lipid extraction and analysis, see the electronic supplementary material, SD1. After a one-way ANOVA used in analysis of the influence of temperature stress, SNK multiple comparison test results are arranged in increasing order from left to right: a , b , c ( p , 0.05).  [55,56,67,78,83,105].
Recently, the first proteomic analysis of the oil-bodyassociated proteins in a diatom has been reported [106]. This study revealed several protein candidates associated with the oil bodies in oleaginous strain Fi. solaris and demonstrated that a proteomic approach may provide new insights into TAG accumulation in oil bodies.
Several recent studies have demonstrated the advantages of a genetic engineering approach to increase the oil content and manipulate fatty acid composition in different species of diatoms (table 3). A number of strategies could be employed to regulate genes involved in lipid metabolism and LC-PUFAs biosynthesis.
During nuclear transformation, transgenes are integrated randomly, making targeting of specific genes more complicated. Rapid development of genome-editing techniques has greatly improved the potential for genetic engineering of microalgae. Targeted and stable modification of the P. tricornutum genome through disruption of UDPglucose pyrophosphorylase has been achieved by using both meganucleases and transcription activator-like effector nucleases (TALENs) [132]. The mutant diatom produced more lipid (45-fold increase in TAG accumulation) than the control when grown in nutrient-stressed media. This generation of an enhanced lipid-producing strain demonstrates the power of genome engineering.
A similar successful example of using TALEN technology has been reported by Weyman et al. [133] who used TALENs to interrupt the gene encoding the urease enzyme in P. tricornutum. Metabolomic analysis revealed a build-up of urea, arginine and ornithine in the urease knockout lines. This technique allowed clarification of the role of urease in the urea cycle and also improved the molecular toolkit for diatom engineering. Other mechanisms for the targeted knockdown/out of endogenous genes include RNA silencing using RNAi and antisense RNA techniques [134], and high-throughput artificial-micro RNA (armiRNA) techniques [135].
Most recently, a highly efficient CRISPR/Cas9-based system has been developed to create stable targeted gene knockouts in P. tricornutum [136]. The reported genome editing method will allow cost-effective functional studies in microalgae and ultimately the engineering of specific traits.  [132] rstb.royalsocietypublishing.org Phil. Trans. R. Soc. B 372: 20160407 Another valuable contribution to the development of novel tools for algal biotechnology is based on the introduction of an episome via conjugation into the cells of P. tricornutum and T. pseudonana [137]. A large DNA fragment has been delivered and maintained, suggesting that this new approach could facilitate metabolic engineering of entire biosynthetic pathways in diatoms.
(a) Overexpressing activities of fatty acid and triacylglycerol biosynthetic pathways One of the first examples of direct targeting of lipid biosynthesis was the overexpression of an ACCase from the diatom Cyc. cryptica [127]. Despite a two to threefold increase in ACCase activity, no significant enhancement in lipid production in transgenic cells was observed. Based on these findings, it was considered that overexpression of ACC enzyme alone might not be sufficient to enhance the whole lipid biosynthesis pathway. One explanation that has been suggested is that under nitrogen stress, the build-up of precursors to the ACCases may play a more significant role in TAG synthesis than the actual ACCase levels [138]. Malic enzyme is involved in pyruvate metabolism and carbon fixation and should be taken into consideration when engineering microalgal strains with enhanced oil content. Overexpression of P. tricornutum malic enzyme (PtME) resulted in markedly increased lipid production in transgenic cells [135]. The total lipid content was enhanced 2.5-fold and reached 57.8% of dry cell mass with a growth rate similar to that of wild-type. The neutral lipid content was further increased by 31% under nitrogen-deprivation conditions. This study demonstrated a significant increase in the oil content in the transgenic diatom, suggesting a new target for developing microalgal strains for industrial production.
Another study demonstrated the important role of glycerol-3-phosphate dehydrogenase (GPDH) in lipid biosynthesis [136]. Overexpression of GPDH in P. tricornutum resulted in a 6.8-fold increase of the glycerol concentration per cell compared with the wild-type, indicating that the overexpression of GPDH promoted the conversion of dihydroxyacetone phosphate (DHAP) to G3P. There was a 60% increase in neutral lipid content, reaching 39.7% of dry cell mass in transgenic cells in the stationary phase, despite a 20% decrease in cell concentration. Fatty acid profiling showed that the levels of C16-and C18-MUFA significantly increased.
GPAT is the critical enzyme that catalyses the first step of TAG formation. A GPAT has been identified and functionally characterized in P. tricornutum [118]. Significant differences in lipid content and fatty acid composition were detected between transgenic and wild-type cells. The neutral lipid content determined by Nile red fluorescence staining was increased twofold. Fatty acid composition showed a significantly higher proportion of unsaturated fatty acids compared with wild-type. EPA levels increased by 40%, while those of C16 : 0 and MUFA decreased by 45% and 12%, respectively. These results suggest that the identified GPAT could efficiently upregulate TAG and biosynthesis in P. tricornutum.
Another approach included the direct modification of fatty acid composition through the expression of acyl-ACP thioesterases to control the chain length. Acyl-ACP thioesterases hydrolyse the acyl moiety of the fatty acid from acyl-ACP, releasing FFA. Heterologous expression of plant acyl-ACP thioesterases specific towards the generation of short-chain lauric acid (C12 : 0) and myristic acid (C14 : 0) in P. tricornutum resulted in an increased accumulation of shorter chain length fatty acids [125]. Similarly, overexpression of the acyl-ACP thioesterases with specificity for C18 fatty acids may improve LC-PUFA synthesis.
A putative thioesterase from P. tricornutum (PtTE; Phart2_33198) has been characterized and heterologously expressed in Escherichia coli, demonstrating moderate activity for C18 : 1-ACP and low activity for saturated fatty acids (C16 : 0 and C18 : 0) [126]. Overexpression of PtTE in P. tricornutum resulted in an almost twofold increase in both C16 : 0 and C16 : 1 and only a minor increase in C18 : 1 and EPA, enhancing the total fatty acid content to 72%.
Overexpression of acyltransferases could represent another valuable strategy for manipulation of lipid content and fatty acid composition in microalgae. An isoform of type 2 diacylglycerol acyltransferase (DGAT2), which participates in TAG assembly has been identified from diatom P. tricornutum [124]. Overexpression of DGAT2A in P. tricornutum resulted in the production of oil bodies, with a 35% increase of neutral lipids measured by Nile red fluorescence staining and a significant increase of EPA. The growth rate of transgenic microalgae remained similar, maintaining a high biomass. However, only one transgenic clone has been analysed and the role of DGAT2A in lipid enhancement requires further investigation.
Overexpression of biosynthetic enzymes of the LC-PUFA pathway may provide an effective way to improve the EPA and DHA content in marine microalgae. The first successful attempt in engineering the omega-3 trait in transgenic algae was reported recently on the overexpression of heterologous genes in P. tricornutum [120]. Phaeodactylum tricornutum can accumulate EPA to levels up to 35% of total fatty acid content, representing a good source for the industrial production of this valuable omega-3 LC-PUFA. However, P. tricornutum does not naturally accumulate significant levels of DHA. Heterologous expression of the Ostreococcus tauri C20 D5-elongase in P. tricornutum resulted in up to eightfold increase in DHA, and this level has been further increased with the co-expression of the acyl-CoA-dependent D6-desaturase, when compared with wild-type strains [120]. Importantly, DHA was shown to accumulate in TAGs, with several new TAG species detected in the transgenic strain. No detrimental effects to P. tricornutum growth rates were observed in transgenic cells: they were comparable to that of wild-type strains. This is the first report of enhancing the levels of omega-3 LC-PUFAs in a diatom by iterative metabolic engineering. This successful example indicates that metabolic engineering of diatoms represents a promising strategy for optimizing accumulation of beneficial omega-3 LC-PUFAs.
This transgenic strain of P. tricornutum (Pt_Elo5) has been further investigated for the scalable production of EPA and DHA [139]. Detailed studies were carried out on the effect of different media, carbon sources and illumination on omega-3 LC-PUFAs production by transgenic strain Pt_Elo5 grown in a 3.5 l bubble column, a 550 l closed photobioreactor and a 1500 l raceway pond with artificial illumination. In addition to ambient light, ponds were supplemented by halogen bulbs, light-emitting diode strips and fluorescent tubes (light level up to 110 mmol photons m 22 s 21 ) which were housed rstb.royalsocietypublishing.org Phil. Trans. R. Soc. B 372: 20160407 under polythene sheeting for culture/environment protection. A significant production of DHA over EPA has been observed in cells grown in a photobioreactor, equivalent to 2.1 mg l 21 DHA in a mid-exponentially growing algal culture. Omega-3 LC-PUFAs production in a raceway pond was an impressive 36% of TFA, averaging 23% EPA and 10% DHA (figure 3). These results clearly demonstrate the efficacy of large-scale cultivation of the transgenic Pt_Elo5 and is development as a platform for the industrial production of EPA and DHA.
When the D5-desaturase gene PtD5b was cloned and overexpressed in P. tricornutum, fatty acid composition was altered [123]. The neutral lipid content determined by Nile red fluorescence staining indicated an increase in transgenic cells. Engineered cells showed a similar growth rate to with the wild-type, thus keeping high biomass productivity.
A recent study has demonstrated that overexpression of endogenous fatty acid elongase genes in T. pseudonana can increase levels of EPA and DHA up to 1.4-and 4.5-fold, respectively [119].

(b) Blocking competing pathways
An alternative strategy to increase lipid accumulation is to block competing pathways to enhance the metabolic flux channelling to TAG biosynthesis.
Starch is a major carbon and energy storage compound in many microalgae. In diatoms, the fixed carbon is stored as the b-1,3-glucan, known as chrysolaminarin. This is a watersoluble polysaccharide stored in vacuoles. In diatoms, chrysolaminarin synthesis shares common carbon precursors with lipid synthesis. Thus, shunting carbon precursors from the chrysolaminarin synthesis pathway is an efficient way to boost oil accumulation [140]. UDP-glucose serves as the substrate for chrysolaminarin biosynthesis [141]. The effects of the suppression of UDP-glucose pyrophosphorylase (UGPase) on chrysolaminarin biosynthesis and carbon allocation in P. tricornutum were investigated in two studies. Daboussi et al. [132] reported a 45-fold increase in TAG accumulation in the transgenic strains, generated through the disruption of the UDP-glucose pyrophosphorylase using TALEN. A complementary study demonstrated that silencing of UDP-glucose pyrophosphorylase resulted in significant decreases in chrysolaminarin content and increases in lipid synthesis [128]. These findings suggest that UGPase is a rate-limiting enzyme and may play an important role in chrysolaminarin biosynthesis and carbon allocation. The results confirmed the feasibility of increasing lipid production through redirecting photosynthetically assimilated carbon away from starch synthesis to neutral lipid synthesis.
The pyruvate dehydrogenase complex (PDC) catalyses the conversion of pyruvate into acetyl-CoA, NADH and CO 2 , thus directing the carbon flow into the TCA cycle. PDC activity indicates the rate of the entry of pyruvate into the TCA cycle and subsequently to oxidative phosphorylation or fatty acid synthesis. PDC activity is primarily regulated by reversible phosphorylation by PDK, which phosphorylates and deactivates PtPDK [142]. Ma et al. [130] have identified a putative PDK gene (PtPDK) from P. tricornutum and generated a PtPDK antisense knockdown transgenic diatom. Neutral lipid content determined by Nile red staining of transgenic cells increased up to 82%, although the fatty acid composition was not altered. Interestingly, the transgenic cells showed slightly lower growth rate but similar to the wild-type cell size.
When starved for nutrients, microalgae redirect carbon towards biosynthesis of storage lipids, TAGs. Another strategy to develop an efficient pathway to enhance lipid production is by suppressing a diatom's ability to incorporate nitrogen. Levitan et al. [129] have studied the effect of nitrogen stress on the remodelling process in P. tricornutum by knocking down the gene encoding for nitrate reductase, a key enzyme required for the assimilation of nitrate. The transgenic strains exhibited 40-50% of the mRNA, protein content and enzymatic activity of the wild-type, concomitant with a 43% increase in cellular lipid content. This study indicated that a nitrate reductase knocked-down strain shunted approximately 40% more carbon towards TAGs than the wild-type without losing photosynthetic capacity, suggesting that redirecting carbon towards lipid biosynthesis can be achieved by altering the expression of genes distinct from those directly involved with lipid biosynthesis. An alternative strategy to increase lipid accumulation is to decrease lipid catabolism. The targeted knockdown of lipid catabolism, and specifically lipases, could potentially improve the accumulation of FFA and enhance lipid content with less impact on the primary carbon pathways associated with growth. Trentacoste et al. [131] using antisense RNAi constructs successfully engineered T. pseudonana to disrupt lipid catabolism by targeting an enzyme with lipase activity. This targeted knockdown resulted in an increase in the accumulation of TAG and total lipid yield without impacting growth rate, under both continuous light and alternating light/ dark, continuous growth and nutrient replete versus nutrient deficient conditions. Fatty acid analysis revealed that knockdown strains contained more 16 : 0 and 18 : 2 than wild-type species. However, the mechanisms responsible for this skewing of the fatty acid profile are unclear. These results demonstrate that disrupting lipid catabolism is also a feasible approach to improve TAG accumulation in microalgae without affecting growth rates or biomass production.
Most microalgae are obligate photoautotrophs and require light for their growth. The requirement for light to increase cell densities and production is the main objective and a limiting factor of their cultivation [48]. Heterotrophic growth in conventional fermenters can be a cost-effective alternative to photoautotrophic growth. Zaslavskaia et al. [143] performed a trophic conversion of P. tricornutum by introducing a gene encoding a glucose transporter and demonstrated that transgenic P. tricornutum could thrive on exogenous glucose without light, thereby becoming heterotrophic.
Recently, a similar approach has been employed to create a heterotrophic strain of P. tricornutum that also accumulates enhanced levels of DHA [144]. This was achieved by generating transgenic strains co-expressing D5-elongase from O. tauri with a glucose transporter from the moss Physcomitrella patens. This double transformant has the capacity to grow in the dark in liquid medium supplemented with glucose and accumulate substantial levels of omega-3 LC-PUFAs. The effects of glucose concentrations on growth and LC-PUFA production of wild-type and transformed strains cultivated in the light and dark were studied. The highest accumulation of omega-3 LC-PUFAs was observed in cultures grown under mixotrophic conditions in the presence of 1% glucose (up to 32.2% of total fatty acids). Both DHA and EPA were detected at high levels in the neutral lipids of transgenic cells grown under phototrophic conditions, averaging 36.5% and 23.6% of total fatty acids, respectively. This study demonstrates the potential for P. tricornutum to be developed as a viable commercial strain for both EPA and DHA production under mixoand heterotrophic conditions.

Conclusion
During the past decade and a half, intense research has been performed and considerable progress made in the genetic engineering of diatoms. Based on recent advances, it is clear that rational metabolic engineering of microalgae has a promising future for designing strains with improved lipid accumulation and desired fatty acid content. It is likely that a combination of strategies will provide the most feasible approach to improve LC-PUFA production and accumulation in TAG without inhibiting growth rates. In particular, our ever-improving understanding of lipid metabolism, combined with the promise of synthetic biology approaches (design-build-test), increased automation and HTP analyses, have the capacity to provide a literally transformative shift in our ability to direct the biosynthesis of any chosen compound. Ultimately, a digital blueprint of diatom metabolism would be available which would be predictive for varied inputs and outputs in (e.g.) lipid biosynthesis. By such computationally supported approaches, the true promise of predictive biology to deliver useful outputs will be realized.
Data accessibility. This article has no additional data. Competing interests. We declare we have no competing interests. Funding. This project was supported by BBSRC grant no. BB/ L002957/1.